Originally Posted by
Cari-in-Oly
Bkay that's not quite how that cord block works. The "light" part of it gets constant power when you plug it in and the "motor" part gets power when the controller is used. So if you plug the motor and light in the wrong spots, the light will come on when you press the controller(if the light switch is on) and the motor take off like a shot and will run at full speed until you unplug it.
Cari
The cord block on my MW 17 Jewel was not labeled at all. It looked generic, like it came from a hardware store. I'm not sure how it worked. I only know that when I bought it, it worked. The case stunk, so I removed everything in the case and put the case in the car in the summer stuffed with newspaper and a bowl of cat litter. (It helped, but did not totally solve the problem.) When I put it back together, it wouldn't work. By that I mean the machine was totally dead and did not respond to the controller (I can't remember if the light worked or not.). I did an online search and finally found something about the plugs. I reversed where the plugs were plugged in and it worked normally.
I thought someone else might benefit from what I experienced.
bkay