Originally Posted by
Gay
Be daring and replace the damaged pieces - I think the only way to repair them is to either use the same shade of fabric underneath with a double-sided fusible or applique a star or something on the top.
For the borders I just used a 5" wide strip of fabric, folded the edges of the hexies under, and appliqued over the border - used soluble glue instead of pinning.
[ATTACH=CONFIG]596063[/ATTACH]
i think I could try this, it will take forever but it’s the option I understand the best.
Originally Posted by
ptquilts
Now you know why so many GFG's were left unfinished!!
i didn’t know that but I’m not a bit surprised. The top and bottom are left with a different edge than the sides.
Originally Posted by
Rhonda K
Remove the torn pieces and replace them. It is just tedious but can be done. You can mark the seam allowances on the replacement fabric so you have the stopping points. Starch the pieces and/or use freezer paper. It's one seam at a time. You can do this!
Trim off the hex edges and remove any frayed edges even if you lose a little of the design. Stay stitch around the whole quilt. Press again and then add straight borders.
It's a beautiful quilt and certainly deserves your time and attention to compete it.
Your side kick is a cutie!
I think you guys are right, I need to try to replace the ripped hexes. They are all in the red fabric which is cotton and solid, how hard could it be? (Famous last words)
Originally Posted by
Geri B
What is Hexie size? Easy to remove and replace. Use epp method. Go to YouTube for ideas on how to finish the edges and border (if desired).....
the hexes are about three inches give or take, they are not all exact although the seam allowance are remarkably consistent, and the whole thing was done by hand. I feel a little sheepish taking it to my machine but finished is better than perfect.