Originally Posted by
Rhonda K
I use 3/8 inch seam with binding cut at 2.5 inches. Make some samples and mark the allowance on sample.
If you use a 3/8 inch seam allowance, you have to stop at the corners 3/8 inch also. I stop at the 3/8 inch and then stitch off on an angle.
It took me a while to learn to ignore that "stop stitching 1/4 inch from the edge" instruction when it comes to bindings. Stop stitching the width of your seam allowance from the edge/end.
That
only applies when one is stitching 1/4 inch from the edge when applying binding.