Originally Posted by Glenn

After the black finish was to my likeing I took gold paint and repaired the lettering using tape and and an artist fine brush. I am not an artist so bear with me here. After the paint was dry I applied a thin coat of shellac over the decal to protect it using the french polish method. At this point let cure for about a week and wax if desired but it is not needed at this point if you applied a clear coat of shellac over the entire machine. Ok now lets show you the end results of this cleaning of the very nasty machine. To shine the metal parts I used Brasso and a dremel with a cloth buffing pad. Then put it all back together ecept the motor that I will not use. Thanks to Charlee I have a bobbin slide plate to this badged White. Thank you Fiesty. Now ask all the questions you want.


Skipper