Part two.
Assembly of the base side coverings.
1. Take piece of 3" x 3" batting and fold in half making it 3" x 1.5"
2. Take piece of 3'x 3.5" contrasting fabric 'two', and place right side DOWN on work surface.
3. Place folded batting in center of the wrong side of fabric.
4. Fold the ends over for finished look (and glue in place if you want, it's not necessary).
5. Take the fabric/batting piece and place along the center corner of the cube
6. Take your thin object (see my pic), hold the one side of the fabric while you gently push the other side in between the wood and the glass.
7. Repeat on the other side of that corner so each side in tucked in and secure. (Once it is in and secure you may take a small amount of glue to make it permanent. Be careful NOT to get the glue onto the glass as this will make your glass unable to be removed for cleaning.) I just leave it tucked without gluing)
8. Repeat steps above for all 4 corners.
This should conclude covering your four corners.
Pushing fabric in between wood and glass
[ATTACH=CONFIG]47538[/ATTACH]
Folding the batting and placing in center of fabric piece # 1, 2 & 3
[ATTACH=CONFIG]47664[/ATTACH]
Glue if desired # 4
[ATTACH=CONFIG]47665[/ATTACH]
Fold over #4
[ATTACH=CONFIG]47666[/ATTACH]