Take a deep breath. You're almost done!
Eat another piece of chocolate or have another sip of coffee/tea.
Bottom frame cover assembly.
Preparing fabric tube ---
1. Take one of the 22" x 2" pieces of fabric and place right side DOWN on your work surface.
2. Take one of the 21" x 2" pieces of batting and fold in half so you have a piece that is 21" x 1".
3. Place batting in the center of the wrong side of the fabric.
4. Gradually take one side of the fabric and fold over onto the batting. Take the other side and fold over onto the fabric so that the batting is completely covered. Glue the fabric to itself to secure. (I do about 2 inches at a time).
5. Continue this along the length of fabric except for the last 1 or 1.5 inch. (having a raw edge along the length is o.k.)
6. Wrap this fabric tube around the bottom frame to be sure you have a piece long enough to wrap around and over lap about an inch. Take off and set aside while you follow # 7.
7. Repeat above process # 1 thru #6 for the top frame cover piece.
Folding fabric over
[ATTACH=CONFIG]47801[/ATTACH]
Covering, glueing, completeing 'tube'
[ATTACH=CONFIG]47802[/ATTACH]