Originally Posted by sawsan

Hi

very humble i am, 8-) here is my first bag I made week ago and I like to share it as tutorial with you ......
I had this pad of old ironing table its about 70 cm in the first pic I put some instructions and lengths.

I cut to straighten the end C-D

I put my first color in the middle of the pad (face up) ,add the second color face down at the top of first color and
stitch the three layers.

I attached the third color to the left of the first color.

I cut lining piece number 1 for the round head till the line A-B + 5 cm tall, face to face,stitching all around, overlapped

and stitched on top, iron.

Piece number 2 to the size 55x33, fixed a pocket 27 cm from the bottom , again stitch down face to face only the

short side, overlapped, stitched onto face . iron.

Tuck around long sides and joined the two ends up with small invisible stitches.

Now bring C-D to A-B (lining inside) join the sides with bias of your choice (mine was one of the colors)

Begin from one sides up making a handle- the long you need - down to the second side of the bag.

I put the magnet in the end so it shows from inside :( and the other piece covered with the 3D flower handmaid as embellishment.

False I made that my lining is very slidy Zipper is more suitable in this case.

and taaaaa daaaaaaaaaa

Now leave u with pic