|
Originally Posted by Onetomatoplant
(Post 6707144)
I used to use the elastics - they were easy and worked well. But I really like the idea of sewing elastic across the corners. Good luck!
|
I use garter clips. I think that is what it is called. It is a piece of elastic with a suspender clip on each end. Works very well. I have 4 but only seem to need it on one corner.
|
We have a california king sized waterbed frame with a regular mattress in it---I sew the top and bottom together at the foot and then sew elastice kaddywampus [my word] across each corner to keep it tucked in---hardest part was getting the right amount of elastice and the right placement on the corners---depends on how thick your matteress is---took some trial and error but works great now---lots of luck
|
Originally Posted by Auntie V
(Post 6709873)
I have found that the sheets that have the extra room for pillow top mattresses can be just as much of an issue as the too tight ones. I ended up making a dart in the corners to take up some of the corner fabric. One set of sheets I even added extra straps of elastic to pass under the mattress and snap onto the other side to keep the wrinkles out. (This set of sheets now only goes on the guest room bed.
|
I use the clips with the elastic--not a big problem. When the elastic stretches out of shape I replace it. Hubby even made the bed yesterday and put those clips on. I hate waking up with the corners of the sheets pulled to the top of the mattress near my pillow.
Originally Posted by Sunnie
(Post 6707093)
I bought a very nice fitted sheet that promised to keep a nice crisp feel (how do they do that) and it does. But the corners slip constantly even from the first night after it is laundered. It seems to fit snugly when I first put it on, but I end up with huge wrinkles under my body. I really dont want to fight with those elastic clips.
Any suggestions on keeping it tight? Sewing on more elastic? |
I used the widest elastic I could find at JAF and sewed the elastic onto the fitted sheet . Worked perfectly for me. If you go that way, you might want to try different positions with safety pins to find the correct angle. Good Luck
|
Originally Posted by Bneighbor
(Post 6707265)
I have one of those 18 inch thick memory foam mattresses (not too fond of it either). It is nearly impossible to lift the corners to slide the edges of the sheets under it. Elastic bands added would be impossible to slide under. Our headboard and footboard are curved around so we cannot get our hands under the mattress top and bottom. My husband had our bedroom furniture custom made, and I truly love it....BUT the mattress is just unforgiving. He constantly complains about the bottom sheet popping off the mattress. We may change it out next year and I am wishing for regular mattresses that you can flip over and be able to lift to put the sheets on.
We too have a deeep mattress that I can't lift. What about velcro? It might be a bit of a pain to sew onto the mattress, but if you use the heaviest strength and then add the soft stuff to the sheet corners...what do you think? |
I WAS WRONG THE ELASTIC DOES NOT HAVE A CLIP ON THE END . REMEMBER YEAR AGO lol GOING BACK MANY YEARS WHEN YOU WORE STOCKINGS AND YOU HAD A GARTER BELT OR A GIRDEL WITH THE LITTLE RUBBER THINGS ON THE END TO ATTACH TO YOUR STOCKING TO HOLD THEM UP? WELL THAT IS WHAT I HAVE. I THOUGHT SOMETHING WAS WRONG WITH WHAT I SAID SO WENT IN TO CHECK AND SURE ENOUGH THAT'S WHAT IT IS. I BOUGHT THEM THROUGH MILES KIMBALL MANY YEARS AGO . SET OF 4 DON'T REMEMBER THE COST BUT WORTH EVERY PENNY. IF YOU USE IT PUT THE BACK CORNER ON FIRST THEN PULL IT TOWARD YOU . VERY STRONG WILL NOT SLIP OFF.
|
| All times are GMT -8. The time now is 08:47 AM. |