Making a Non-Slip Play Mat
 

My little grandson was given a play mat with roads, buildings, RR tracks, etc. His mom wants to use it as a rug in his room, but it is made of a kind of loose felt, and is very slippery on a bare floor. I (blissfully ignorant) volunteered to add a non-slip backing to it, which would stabilize it at the same time. I thought the rubber-like grid mats that are sold to line drawers and cabinets would work well, and I have used small pieces of it to sew things before.
However, when I tried sewing on the long pieces needed to cover the back, the felt part kind of gathers up, and leaves bumps and valleys. I had to sew with the rubber mesh side up, and a strip of wax paper on top to allow the pieces to pass under the presser foot. Pretty sure there is no way the rubber mesh piece could be down, as it is really non skid, and wouldn't move at all.

So I took the stitching out and tried gluing the two fabrics together. First I used spray glue, and that did not stick at all. Then I tried watered down Elmer's glue, and although it works on a small sample on which I really saturated it with glue, it doesn't seem to be working on the larger piece. Actually, checking the sample now, I see it's not sticking either.

So do you have any idea what I can use to make this mat non-skid? Is there a rug backing that I can buy in a large piece? (about 4 by 6 feet)

This is like making a silk purse out of a sow's ear. It's a cheap, poorly made mat that is probably not even washable. I have already spent more time and money than it's worth. Arg!

Here's one at Bed, Bath and Beyond. If you looked, you could probably find a better deal. I'd just buy one and be done with it.

https://www.bedbathandbeyond.com/sto...ord=kids%20rug

Would you be able to sew on the stuff you tried the first time if you lessened your presser foot pressure? You would have to do it "sticky" side up with wax paper still, but the lighter pressure (and a longer stitch length) may work.
Please let us know what you eventually try that works! Good luck!

Wal Mart has product that you put on the floor and then lay the rug over it. You wouldn't sew it. https://www.walmart.com/ip/Ultra-Sto...d5aa594ee93c83

I had read something about someone using either Elmer's glue or some type of silicon drizzled on the back of a slippery item to stop the slipping. You have to let it dry afterwards. I don't know if it would be washable. Here are some possible solutions. https://www.reference.com/home-garde...b6c42d0870e82a

Can you hand sew it on with carpet thread and a large needle? Not fun, but a better chance it would work.....

That grid-like matting is sold in larger sizes, such as 4'x6'. It is not necessary to attach it to the rug; it is designed to sit between the rug and the flooring. I have seen it in sold in Home Goods stores and also at Fleet Farm in their carpeting section.

Here's one on Amazon that comes in a 4'x6' size:
https://www.amazon.com/dp/B00IAVY52U...523413219&sr=3

Edit: If you absolutely must attach it to the rug, I would just hand-stitch the grid to the rug at the corners and a few places along the edges -- just enough to keep it in place. That backing can go through the washing machine later, if necessary, although you wouldn't want to put it through the dryer (can start disintegrating).

The grid matting I have is actually in three pieces, cut from shelf lining rolls. I did lessen the presser foot tension, but may see if I can get by with loosening it some ore. My other plan is to just tack the matting down, kind of like hand tying a quilt, but not so deliberately obvious.
I would be happy to buy him a better one, or make him one---a cute quilt idea? but his mom gave it to him, so I have to mind my manners, lol.

How about backing the original mat with a sheet/fabric and then deal with a solid fabric.

Rather than the drawer lining stuff, try using rug backing. It is a larger grid and sold on the roll (54" wide). Since it is a larger grid, you can simply hand tac spots to hold. I have machine stitched to the edge (actually in about an inch) of a small throw rug and then just hand stitched at a few random spots within.

I think you could make your own grid by using hot glue gun. That is what I use on the bath mats.

Usually when I try to save a dollar I wind up spending more. I have the "stuff" that is made to put under rugs I bought at Lowe's, Just lay it down under rug and it never moves. Did not attach it. It can be cut to size.

Check your local craft store for a product they sell for putting on the back of latch hook rugs. You paint it on with a foam brush (when I am done with the brush, I just throw it away.). I tried using the product you have under my rugs in the kitchen and it did work for a while, until the dust got on it, and then it no longer worked.

Some good ideas here, Thanks. I put it aside for a few days while I clear my mind (and make some jewelry). I will tackle it again next week.

You can purchase the non slip pad at Wal-marts.

Gnome--check out Northcott's panels of "villages" --race track, airport, harbor, town, RR yard & construction site--I used them for mats for my g-boys--sewed 3 together and backed with denim and quilted and they use that as a rug in their bedroom. I kept a couple and backed and they play with them at our house.

I got lucky and found some fabric with roads, road signs, pathways, houses, fire station, school, trees, ... the whole town street layout.. Made little boy quilts out of it -- charity quilts for Lionis (sp) (hospital quilts) years ago.

You might try liquid latex. I purchased a jar from Amazon. You just paint it on, nice and thick, let it dry. I've even washed the rug I put it on, but it wasn't felt.