what about glue stick? less messy than spray glue or elmers -
|
Try Roxanne's Glue-Baste-It - temporary basting glue. Once I tried this I have never needed any other product, especially for bias strips of any size. Perfect for stained glass.
|
Okay. Not entirely sure why this is in General Chit Chat because it relates to quilting. But anyways...
Originally Posted by MTS
Originally Posted by Flying_V_Goddess
I did a little bit of experimentation. I bought some 3/8" fusible tape (Heat n Bond), cut off 1/8" from it, cut a strip of fabric to 1/8", followed the instructions on attaching the tape to the fabric, and ironed the strip to another piece of fabric. And it actually worked. But I'd have to custom cut all my tape and it bonded to the fabric a little bit too well which would make it difficult to reposition. I really had to tug on it good to get that little strip off.
Are you using just a piece of black fabric for the stained glass effect, or are you actually making bias binding from fabric (thinner, but like you can buy on the rolls)? If it's just the single piece black fabric, wouldn't it be easier to attach the fusible (whatever width you bought) to the large piece of fabric and THEN cut the 1/8" strips? I'd even do it with a Steam-A-Seam lite sheet - and a larger piece of black(?) fabric, and then carve off the 1/8" cuts that are needed. Like I said, I think I'm missing something. Wouldn't be the first time. ;-);-)
Originally Posted by Polliwog
Try Roxanne's Glue-Baste-It - temporary basting glue. Once I tried this I have never needed any other product, especially for bias strips of any size. Perfect for stained glass.
|
I saw the suggestion somewhere to use Elmer's School Glue for basting a binding in place, and I imagine it would be good for your purpose also. The person ironed it immediately to set it. It will wash out and not permanently alter the texture of the fabric. Probably you would want to experiment with it before using it on your quilt. It's on my list of things to try sometime.
|
Elmer's school glue is one of my favorites and you DON"T need a special tip. Just open the tip a little and squeeze out dots. Heat set with iron and it's good to go.
|
Rather than custom cutting really thin strips of fusible web, how about this glue. By the way, it is water soluble.
Roxanne's Glue Baste-It http://www.jankrentz.com/displaypage.php?ID=35 |
Originally Posted by Flying_V_Goddess
Originally Posted by MTS
If it's just the single piece black fabric, wouldn't it be easier to attach the fusible (whatever width you bought) to the large piece of fabric and THEN cut the 1/8" strips?
I'd even do it with a Steam-A-Seam lite sheet - and a larger piece of black(?) fabric, and then carve off the 1/8" cuts that are needed. |
Glue-Baste-It is available in the several quilt shops in my area NW of downtown Atlanta. You might also check at Michael's and Joann's. Send me a PM if you can't find it locally - or perhaps online.
|
elmers works great. i did get the little tip, just don't loose the little wire to clean out the little tip.
|
I am a big fan of Elmers School Glue & have used it with great results. It costs about $1 a bottle- best quilting bargain I've had in awhile! Use it with a dry hot iron- just little dots.
|
All times are GMT -8. The time now is 05:31 PM. |