Hi, I'm in Oklahoma.
#1
Member
Thread Starter
Join Date: Mar 2020
Posts: 4
Hi, I'm in Oklahoma.
I'm new to forums but am really interested in what you all have to say. I've quilted a few twin and queen size quilts with a Juki TL-2000Qi on a wooden Grace Machine Quilter frame. It works pretty well but I need to find some new track for it. It uses the one inch flat plastic track, not the one that sticks down in the groove. Grace doesn't sell it any more. Any help would be appreciated! Thanks.
#6
A warm welcome from Southern Indiana! Can't help with your problem, but I'm sure there is someone on the board that will be able to help...although finding tracks for older frames seems to be a problem....good luck!
,
,
#7
Super Member
Join Date: Jun 2010
Location: The Deep South near Cajun Country, USA
Posts: 5,434
I am not familiar with your set up at all. What I do know is that most Home improvement stores (think Home Depot, Stines, Lowes) carry metal flat stock that might work for you. They might even have some plastic flat stock, I just don't know. If you go looking for it, I would measure the width and depth of what is on your table so you can match it up.
#10
Super Member
Join Date: Mar 2011
Location: Maryland
Posts: 2,613
Take a picture of your track and then head to Home Depot/Ace Hardware/Lowe's etc. Hopefully you can find someone who wants to be helpful and is knowledgeable, My Grace frame has metal track which has worked well and needs to be dusted quite badly ( I just looked) Welcome to the board.