Quiltingboard Forums
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page

Quiltingboard Forums (https://www.quiltingboard.com/)
-   Introduce Yourself (https://www.quiltingboard.com/introduce-yourself-f3/)
-   -   Brothers 770 (https://www.quiltingboard.com/introduce-yourself-f3/brothers-770-a-t159932.html)

sik1010 10-13-2011 03:16 AM
Hello, and welcome from Michigan!

lauriequilts 10-13-2011 06:16 AM
Welcome from Wisconsin

Fabric Galore 10-13-2011 07:09 AM
Welcome from central FL. I have a Janome but I have to be careful with the top thread. Sometimes the thread winds around the spool holder and it breaks; other times the thread will jump out of the take up arm. Everytime my thread breaks, I completely rethread the machine and that usually helps.

Grandma Peg 10-13-2011 07:37 AM
Welcome from WI.

reginalovesfabric 10-13-2011 10:00 AM
is your throat plate smooth, if it has a tiny nick in it it will break the thread, also adjust your tension it maybe too tight, rigthy tighty, lefty loosly

hi from Mississippi

Susanna10 10-13-2011 11:08 AM
Welcome from Kansas

Thumbelina 10-13-2011 11:34 AM
Hi Mary Lou, welcome from NE Ohio.

alldayquilter 10-13-2011 11:58 AM
2 Attachment(s)
This picture of my Janome shows the needle. The correct way to thread this machine is to bring the thread down to the left side of the needle and under the hook. I was putting the thread on the hook on the right side of the needle. Having the same problems as you described. After threading correctly, had no more trouble. Such a small thing, but what a difference. Hope this might work for you.

Nanaquilts44 10-13-2011 12:08 PM
Welcome from Houston TX! I know how frustrating a problem like that can be. I have a Baby Lock machine now and just love it.

Little Sue 4.9 10-13-2011 03:43 PM
Hello and welcome to the board, you'love it here.
Little Sue


All times are GMT -8. The time now is 04:13 PM.
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page