drunkards path-easy method
#12
Super Member
Join Date: May 2010
Location: Northwest Georgia
Posts: 3,272
The pattern itself is in my head (LOL!), but here's a tutorial for freezer paper applique'.
https://www.youtube.com/watch?v=Ljl_O2aOT1M
I would use the same method to applique' a circle onto the center of a square of fabric, then cut the square in half both vertically and horizontally, making four "cheater" drunkard's path blocks. Hope that makes sense.
As far as the exact measurements, that would be up to you, depending on the look you want.
I'll try to do a quick tutorial this afternoon, if I can find my freezer paper. It seems to have sprouted legs and walked off.
https://www.youtube.com/watch?v=Ljl_O2aOT1M
I would use the same method to applique' a circle onto the center of a square of fabric, then cut the square in half both vertically and horizontally, making four "cheater" drunkard's path blocks. Hope that makes sense.
As far as the exact measurements, that would be up to you, depending on the look you want.
I'll try to do a quick tutorial this afternoon, if I can find my freezer paper. It seems to have sprouted legs and walked off.
Last edited by moonrise; 05-21-2014 at 04:10 AM.
#13
Super Member
Join Date: May 2010
Location: Northwest Georgia
Posts: 3,272
Okay, here's a quickie tutorial using a 5" charm square.
[ATTACH=CONFIG]476289[/ATTACH]
Step #1: Draw a 4-1/2" circle on the non-shiny side of freezer paper, and cut the circle out.
[ATTACH=CONFIG]476290[/ATTACH]
Step #2: Lay the freezer paper circle SHINY SIDE UP on top of the WRONG side of the charm square. Trim off the corners of the charm square to take away some of the bulk.
[ATTACH=CONFIG]476291[/ATTACH]
Step #3: Iron the edges of the charm square, folding them over onto the freezer paper, which, again, should be SHINY SIDE UP. The edges will stick to the paper, keeping them folded over.
[ATTACH=CONFIG]476292[/ATTACH]
Step #4: Dab a bit of Elmer's School Glue along the edges of the circle.
[ATTACH=CONFIG]476293[/ATTACH]
Step #5: Place the circle in the center of a 6-1/2" square of fabric, and iron it. This will dry the glue quickly, so the circle will stay in place without needing to use pins.
[ATTACH=CONFIG]476294[/ATTACH]
Step #6: Stitch around the very edge of the circle, as close to the edge as you can get. I used a straight stitch, but you can use whatever stitch you want as long as it secures the circle to the square. You can also hand-applique' it, if you want.
[ATTACH=CONFIG]476295[/ATTACH]
Here is the sewn circle.
[ATTACH=CONFIG]476296[/ATTACH]
Step #7: Cut the 6-1/2" square vertically and horizontally, making four 3-1/4" squares.
[ATTACH=CONFIG]476297[/ATTACH]
Step #8: Tear away the freezer paper and discard it.
[ATTACH=CONFIG]476298[/ATTACH]
Step #9: You can trim this flap of fabric away if you want, leaving 1/4" seam allowance. I just left mine as is. Either way is fine.
One more step to follow. It'll only let me post 10 photos at a time.
[ATTACH=CONFIG]476289[/ATTACH]
Step #1: Draw a 4-1/2" circle on the non-shiny side of freezer paper, and cut the circle out.
[ATTACH=CONFIG]476290[/ATTACH]
Step #2: Lay the freezer paper circle SHINY SIDE UP on top of the WRONG side of the charm square. Trim off the corners of the charm square to take away some of the bulk.
[ATTACH=CONFIG]476291[/ATTACH]
Step #3: Iron the edges of the charm square, folding them over onto the freezer paper, which, again, should be SHINY SIDE UP. The edges will stick to the paper, keeping them folded over.
[ATTACH=CONFIG]476292[/ATTACH]
Step #4: Dab a bit of Elmer's School Glue along the edges of the circle.
[ATTACH=CONFIG]476293[/ATTACH]
Step #5: Place the circle in the center of a 6-1/2" square of fabric, and iron it. This will dry the glue quickly, so the circle will stay in place without needing to use pins.
[ATTACH=CONFIG]476294[/ATTACH]
Step #6: Stitch around the very edge of the circle, as close to the edge as you can get. I used a straight stitch, but you can use whatever stitch you want as long as it secures the circle to the square. You can also hand-applique' it, if you want.
[ATTACH=CONFIG]476295[/ATTACH]
Here is the sewn circle.
[ATTACH=CONFIG]476296[/ATTACH]
Step #7: Cut the 6-1/2" square vertically and horizontally, making four 3-1/4" squares.
[ATTACH=CONFIG]476297[/ATTACH]
Step #8: Tear away the freezer paper and discard it.
[ATTACH=CONFIG]476298[/ATTACH]
Step #9: You can trim this flap of fabric away if you want, leaving 1/4" seam allowance. I just left mine as is. Either way is fine.
One more step to follow. It'll only let me post 10 photos at a time.
Last edited by moonrise; 05-21-2014 at 04:57 AM.
Thread
Thread Starter
Forum
Replies
Last Post