Laser Tools...Please Read This
10-08-2016, 01:01 PM
#1
Power Poster
Thread Starter
Join Date: Jan 2008
Location: Florida
Posts: 17,636
Laser Tools...Please Read This
I care about ppl's safety...all people, especially quilters.
My mother is a quilter. She is legally, but not totally blind.
She wanted a laser beam on her sewing machine so I researched them, thinking
I might want one too.
What I found was surprising and thank goodness I read up on them before installing
one.
Here are some website addies for you to see information for yourself. Please read past
the first couple of sentences for all the information. Many start out with the "good news"
and then get to the warnings later.
Light from these lasers on a sewing machine can be reflected at your eyes and you are
going to be staring at it for a long time, maybe hours.
Please don't find out the hard way.
http://www.laserpointersafety.com/la...head-eyes.html
http://www.sciencebuddies.org/scienc...r_Safety.shtml
https://en.wikipedia.org/wiki/Laser_safety
http://www.lasersafetyfacts.com/2/...
WHAT IS A CLASS 2 LASER?
Class 2 lasers are considered safe for normal operation. Class 2 lasers' output power is below 1 milliwatt. All Class 2 lasers emit visible light only.
A Class 2 laser is relatively weak. It normally would not harm an eye beam. unless a person deliberately stared into the beam.
(Light reflected is the equivalent and it only takes seconds to burn your retina. mousie's personal comment inserted here.)
However, even a Class 2 laser can be a distraction, glare or flashblindness hazard for pilots and drivers. NEVER aim any laser towards an aircraft or vehicle that is in motion. This is unsafe and is illegal -- you could be arrested and jailed.
mousie: not only is it illegal, don't be fooled by safety sites that say it's too
far to affect a pilot. It's the glare also, that is distracting and a visual problem for these pilots.
My mother is a quilter. She is legally, but not totally blind.
She wanted a laser beam on her sewing machine so I researched them, thinking
I might want one too.
What I found was surprising and thank goodness I read up on them before installing
one.
Here are some website addies for you to see information for yourself. Please read past
the first couple of sentences for all the information. Many start out with the "good news"
and then get to the warnings later.
Light from these lasers on a sewing machine can be reflected at your eyes and you are
going to be staring at it for a long time, maybe hours.
Please don't find out the hard way.
http://www.laserpointersafety.com/la...head-eyes.html
http://www.sciencebuddies.org/scienc...r_Safety.shtml
https://en.wikipedia.org/wiki/Laser_safety
http://www.lasersafetyfacts.com/2/...
WHAT IS A CLASS 2 LASER?
Class 2 lasers are considered safe for normal operation. Class 2 lasers' output power is below 1 milliwatt. All Class 2 lasers emit visible light only.
A Class 2 laser is relatively weak. It normally would not harm an eye beam. unless a person deliberately stared into the beam.
(Light reflected is the equivalent and it only takes seconds to burn your retina. mousie's personal comment inserted here.)
However, even a Class 2 laser can be a distraction, glare or flashblindness hazard for pilots and drivers. NEVER aim any laser towards an aircraft or vehicle that is in motion. This is unsafe and is illegal -- you could be arrested and jailed.
mousie: not only is it illegal, don't be fooled by safety sites that say it's too
far to affect a pilot. It's the glare also, that is distracting and a visual problem for these pilots.
Last edited by Mousie; 10-08-2016 at 01:21 PM.
10-09-2016, 09:24 AM
#3
Super Member
Join Date: Mar 2012
Location: Kenai, Alaska
Posts: 1,150
I wouldn't mind a laser built into the machine but I've read that the one you can buy at Harbor Freight is a pain to attach and the laser is wider than necessary. I will stick with my other forms of sewing a straight line.
10-09-2016, 09:35 AM
#4
Super Member
Join Date: Dec 2010
Location: Chula Vista CA
Posts: 7,342
Thank you, Mousie for doing the research for me. I was thinking I would want one I could attach to my machines and wondered about the safety. And I agree with MarleneC, I think I will wait until I buy a new machine and have it included.
10-09-2016, 09:53 AM
#5
Super Member
Join Date: Oct 2008
Location: The Finger Lakes of upstate NY
Posts: 3,446
Wavelength: 630-660 nM Output power: less than1 mW FDA approved
Using this info on the Central Machinery model, using as intended (ie, not directly looking at laser) and reviewing classifications on the sciencebuddies website, I think these would be okay. That said, if somebody feels unsafe using them - don't.
Using this info on the Central Machinery model, using as intended (ie, not directly looking at laser) and reviewing classifications on the sciencebuddies website, I think these would be okay. That said, if somebody feels unsafe using them - don't.
10-09-2016, 11:38 AM
#6
Super Member
Join Date: Jul 2010
Location: Desert Southwest
Posts: 1,314
I just bought the Laser Marker from Harbor Freight...on sale $5.99 and 20% off coupon. It is a Class II laser with maximum output of less than 1mW. Label also cautions to no look directly into the light source. FYI anyone who saw the posting suggesting these laser guides. I'm glad I saw that item and look forward to using mine.
10-09-2016, 04:04 PM
#7
Power Poster
Thread Starter
Join Date: Jan 2008
Location: Florida
Posts: 17,636
Originally Posted by peaceandjoy
Wavelength: 630-660 nM Output power: less than1 mW FDA approved
Using this info on the Central Machinery model, using as intended (ie, not directly looking at laser) and reviewing classifications on the sciencebuddies website, I think these would be okay. That said, if somebody feels unsafe using them - don't.
Using this info on the Central Machinery model, using as intended (ie, not directly looking at laser) and reviewing classifications on the sciencebuddies website, I think these would be okay. That said, if somebody feels unsafe using them - don't.
I guess I am so careful bc I've had to watch my mother's sight go sometimes in
increments and sometimes a lot faster.
I am in line and have already experienced some loss myself, due to high carb intake.
I remedied that as soon as I knew the cause.
I don't feel comfortable with the lasers and under my own personal circumstances,
I won't be using one.
My intentions were of the best kind to get ppl to be informed before making such
an important decision.
I hope if anyone chooses to get a laser it's after finding one with approval and
that they enjoy a healthy relationship with it.
Last edited by Mousie; 10-09-2016 at 04:07 PM.
10-10-2016, 03:58 AM
#9
Power Poster
Join Date: Mar 2013
Location: Corpus Christi, Tx.
Posts: 16,105
I was going to get one and I also have an appointment this month with my ophthalmologist. I called to reschedule but to no avail. I mentioned this laser and was told not to do anything with a laser that I would be looking at because of reflection back even as a guide especially since my eyesight has taken a downturn. Shortly, after that I found my seam guide that attaches to my 401. Saved myself some money and kept my sight on hold.
10-10-2016, 06:31 AM
#10
Super Member
Join Date: May 2012
Location: Central Wisconsin
Posts: 4,391
The first time I read about lasers a few days ago, my first thought was: Are's those things kind of dangerous?
I will find other options.
My grandson had a small laser that he was pointing everywhere. (Cats love to jump on the beam and try to catch it.)
He forgot it in my car in the door handle recess. His mother said: Good! We didn't tell him where it was and it went into the trash later.
I will find other options.
My grandson had a small laser that he was pointing everywhere. (Cats love to jump on the beam and try to catch it.)
He forgot it in my car in the door handle recess. His mother said: Good! We didn't tell him where it was and it went into the trash later.
Thread
Thread Starter
Forum
Replies
Last Post
