Help removing embroidery thread
#1
Junior Member
Thread Starter
Join Date: Nov 2012
Location: California
Posts: 112
Help removing embroidery thread
I had a quilt made for my granddaughter’s wedding and had their names and wedding date embroidered on the quilt. Unfortunately less than a year later they have separated and filed for a divorce. They gave the quilt back to me. The lady that made it embroidered it prior to sandwiching it and so I can’t access the back of the stitches. How can I remove it especially since the letters are rather thin. Thank you
#2
Super Member
Join Date: Aug 2010
Location: Upstate New York
Posts: 1,231
Just start with a seam ripper and cut a few stitches..since it's hand embroidered there won't be bobbin stitches to deal with. Use the seam ripper and a pair of tweezers to grab the thread and pull out the tiny pieces, it is less horrid than you are imagining! Just start and it'll be fine !
#4
Super Member
Join Date: May 2012
Location: S.E. Queensland, Australia
Posts: 1,457
There is a gadget for this but is expensive, it's like a fine shaver. I very carefully pick at it with a seam ripper till the stitching is all gone, but be careful, as it's not hard to also cut the fabric. I would look at appliqueing something suitable over the patch later, depending on how it looks once the embroidery is gone, and washed.
This is the Australian company that sells the shaver, you may be able to get it in the USA, it shouldn't be quite as costly.
https://www.echidnasewing.com.au/peg...0volt-cordless
This is the Australian company that sells the shaver, you may be able to get it in the USA, it shouldn't be quite as costly.
https://www.echidnasewing.com.au/peg...0volt-cordless
#5
Senior Member
Join Date: Dec 2016
Location: Upstate SC
Posts: 679
Doing it without access to the bobbin stitches will be difficult. If the names are in a corner, could you remove the binding and the quilting stitches, so you could access the back of just that area?
You may need a brand new seam ripper with a very small part that slips under the tiniest stitches. Removing machine embroidered stitches is tricky to avoid cutting the fabric, but can be done. Go slow, be extremely careful, and if you get frustrated, stop and put aside for later. Ask me how I know this.....lol
I am glad that you got the quilt back even if "restoring" it is a pain.
You may need a brand new seam ripper with a very small part that slips under the tiniest stitches. Removing machine embroidered stitches is tricky to avoid cutting the fabric, but can be done. Go slow, be extremely careful, and if you get frustrated, stop and put aside for later. Ask me how I know this.....lol
I am glad that you got the quilt back even if "restoring" it is a pain.
#8
Power Poster
Join Date: Nov 2009
Location: Mableton, GA
Posts: 11,194
It is a dilemma. I have been working on removing machine embroidery from a polyester knit shirt. My son changed jobs and likes the shirt and wants the logo gone. For that fabric even with stabilizer the needles have damaged the fabric. Don’t know if this would happen on quilting cotton. I’ve worked from the back with a lighted magnifier and it is not easy. Appliqué in this case not an option. I hope you can figure out a way. Let us know how it works out
#9
Junior Member
Thread Starter
Join Date: Nov 2012
Location: California
Posts: 112
I tried to upload a picture but I’m no good at this stuff. I am trying to pick out which will be a really big job. I’d love to just put an appliqué over the top but it’s so heavily quilted that I don’t think it would ever look right.
#10
If you put batting behind the applique, the quilting behind that wouldn't show
Thread
Thread Starter
Forum
Replies
Last Post