Anybody heard of a Nelco sewing machine? Worth fixing up?
#13
Member
Join Date: Jul 2013
Posts: 8
Hello to all. I just joined this forum after searching with Google for a question I have, about a Nelco machine I recently purchased.
My question is... Does anyone know if it is possible to repair the stud that carries the upper tension discs, spring, and adjustment knob? The one that I have is loose and comes out of the casing. Might someone know how to fix it?
From the looks of the stud/post itself, and looking in the hole where it goes, it seems there is a set screw or a roll pin that locks it in place and may have come loose, but I don't know for sure. Where it goes is one of the most difficult places to see inside of the casing from other open areas, looking in. I hope this was understandable.
Help!
My question is... Does anyone know if it is possible to repair the stud that carries the upper tension discs, spring, and adjustment knob? The one that I have is loose and comes out of the casing. Might someone know how to fix it?
From the looks of the stud/post itself, and looking in the hole where it goes, it seems there is a set screw or a roll pin that locks it in place and may have come loose, but I don't know for sure. Where it goes is one of the most difficult places to see inside of the casing from other open areas, looking in. I hope this was understandable.
Help!
#14
Super Member
Join Date: Jan 2012
Posts: 4,783
bartack, I think you should post your question on the "antique and vintage machines" discussions. There are many very knowledgeable people there who all love vintage machines and know just about everything there is to know about them. Actually, that would probably be a good idea for the owner of the Nelco machine, too.
#17
Member
Join Date: Sep 2014
Posts: 1
I have one that I purchased when my first born was due, she is now 45 years old. I use it on a daily basis. The biggest thing with adjusting the tension, is first to know how to do it correctly and to play with it. If the tread is too close to the top your bobbin is not tight enough, etc. I couldn't live without mine . . I can sew real fast with it, I can sew Leather with it . . and I do everything from clothes to quilts and all of our law enforcements and EMT patches
#18
Power Poster
Join Date: Nov 2009
Location: Mableton, GA
Posts: 11,326
#19
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
No it's not true, and seeing's how that was the only post she ever made, I don't think she was here very long. Sewing machines were first japanned, then went to a heavy enamel paint.
And Nelco machines were Japanese made and not affiliated in any way with the Italian Necchi's other than being imported by the same distributor until Necchi canned him for it.
Cari
Last edited by Cari-in-Oly; 09-29-2014 at 02:03 PM.
#20
Power Poster
Join Date: Jun 2011
Location: Southern California
Posts: 19,127
I would just ask around for suggestions on a good sewing machine repair man. I know of one where I live. They usually can find the problem easily and will give you an estimate on what it will cost. Your DSM may just need a tune up like a car to get everything adjusted properly which will run about $100 depending on where you live.
Thread
Thread Starter
Forum
Replies
Last Post
PBobbin13
For Vintage & Antique Machine Enthusiasts
2
07-07-2013 03:22 AM
Judie
For Vintage & Antique Machine Enthusiasts
21
11-29-2011 05:58 PM