Baby loves poetry quilt
07-22-2013, 07:59 PM
#1
Member
Thread Starter
Join Date: Jul 2013
Posts: 3
Baby loves poetry quilt
I am having such a hard time with this pattern. I have cut all my pieces exactly as specified and am using a scant 1/4" seam allowance but my blocks are not even and are 1/2" smaller than they should be. What am I doing wrong? I am new to quilting but this was supposed to be an easy project. I am getting so frustrated and disappointed. 😣
07-23-2013, 04:01 AM
#3
Power Poster
Join Date: Mar 2011
Location: western NY formerly MN, FL, NC, SC
Posts: 51,433
here's one finished by one of our members http://www.quiltingboard.com/picture...ne-t57915.html
perhaps you want to send her a PM to see if she has any advice for you
perhaps you want to send her a PM to see if she has any advice for you
07-23-2013, 04:03 AM
#4
Power Poster
Join Date: Mar 2011
Location: western NY formerly MN, FL, NC, SC
Posts: 51,433
07-23-2013, 04:44 AM
#5
Power Poster
Join Date: Dec 2010
Location: Michigan
Posts: 11,276
Three basic things can make your block come out the wrong size.
1) make sure you are cutting accurately. Use the same ruler (or at least the same brand ruler) when cutting the whole quilt
2) You said your seams are the correct width, it's always good to double check. Here's a good tutorial:
http://www.quiltingboard.com/tutoria...ce-t89997.html
if you use a different thread or different weight fabric, you may have to adjust your seam.
3) finally, you need to press your patches carefully. Sew the seam, press the seam to set it, then carefully press to one side from the front. Make sure you don't press a tiny crease in your seam. I press each seam as I go.
The only other thing I can think of is an error in the pattern. I would second the suggestion to PM the other member who made the quilt to see if there was a typo in the pattern.
Good luck!!
1) make sure you are cutting accurately. Use the same ruler (or at least the same brand ruler) when cutting the whole quilt
2) You said your seams are the correct width, it's always good to double check. Here's a good tutorial:
http://www.quiltingboard.com/tutoria...ce-t89997.html
if you use a different thread or different weight fabric, you may have to adjust your seam.
3) finally, you need to press your patches carefully. Sew the seam, press the seam to set it, then carefully press to one side from the front. Make sure you don't press a tiny crease in your seam. I press each seam as I go.
The only other thing I can think of is an error in the pattern. I would second the suggestion to PM the other member who made the quilt to see if there was a typo in the pattern.
Good luck!!
07-23-2013, 07:34 AM
#7
Super Member
Join Date: Jun 2007
Location: British Columbia
Posts: 8,044
Originally Posted by QuiltnNan
here's a link to the pdf instructions http://www.bomquilts.com/FQS/FQSBaby...oetry-Set2.pdf
I hope you can experiment with your seam allowance to come up with a scant ¼" seam. I've been piecing since 1993 and really don't enjoy cutting quilt pieces with the 1/8th fraction in them. Maybe take some scrap fabrics and practice until you can get that size right? Or recut the outside strips larger than required & cut them down if you have all your blocks already made?
02-10-2016, 04:52 AM
#9
Super Member
Join Date: Jul 2014
Location: Illinois
Posts: 2,140
Did you add the 1/2" for your seam allowances? The instructions I looked at on the site only list the finished sizes of the pieces in the block. If you add 1/2" to W and 1/2" to L for everything, it should come out the proper finished size.
Thread
Thread Starter
Forum
Replies
Last Post
