Go Back  Quiltingboard Forums > Main
Using leach to change Color >

Using leach to change Color

Using leach to change Color

Thread Tools
 
Old 08-02-2012, 09:55 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Apr 2011
Location: SanAntonio,TX
Posts: 238
Default Using leach to change Color

I would like to lighten the frabic I am using to make it have a swirly pattern,am thinking I can use a mild bleach and liquid soap solution to accomplish this. Has anyon on the board tried this ?
MaggieBB is offline  
Old 08-02-2012, 10:14 AM
  #2  
Member
 
Join Date: Jul 2012
Posts: 13
Default

I have never bleached quilt fabric. T-shirts are the only thing I have intentionally bleached--with just a bleach and water solution (I don't remember the concentration of bleach).

A suggestion I have comes from a TV show I saw once. They took a shirt, sprayed bleach on it, then when it was the right color, they sprayed vinegar on it so the bleach wouldn't continue to change the color. Depending on the size of the fabric you have, you could lay it out, spray the bleach where you want it to make a swirly pattern. That might give you more control over the bleached pattern.

It certainly couldn't hurt to try it with a small amount of fabric. Even if it doesn't turn out exactly how you imagined you could still use the fabric for something else in the future.

Good luck!
quiltinmom is offline  
Old 08-02-2012, 10:36 AM
  #3  
Junior Member
 
quiltingdoe's Avatar
 
Join Date: Dec 2010
Location: Hawaii-The Big Island
Posts: 265
Default

Be very careful with bleach. If your fabric has many colors in it, the colors may run together and be changed to a color you may not want. My husband wanted to "age" his aloha shirts, so he threw about 12 of them in the washer with "a little" bleach. It did "age" them, but it also changed the colors as they all ran together. He's OK with it though.
So as quiltinmom says, try it on a small piece first. Please post the before and after for us who are curious. Mahalo.
quiltingdoe is offline  
Old 08-02-2012, 10:49 AM
  #4  
Senior Member
 
Join Date: Sep 2010
Location: NM
Posts: 989
Default

Use a Clorox bleach pen, then vinegar in the rinse. I use one on a denim dress one time, came out cute.
Pat M. is offline  
Old 08-02-2012, 11:15 AM
  #5  
Super Member
 
NikkiLu's Avatar
 
Join Date: May 2010
Location: So. Central MO
Posts: 2,759
Default

Gosh - glad that you said "bleach" instead of "leach" - was really getting worried here.
NikkiLu is offline  
Old 08-02-2012, 11:21 AM
  #6  
Super Member
 
ghostrider's Avatar
 
Join Date: Jan 2009
Posts: 4,688
Default

Originally Posted by MaggieBB View Post
I would like to lighten the frabic I am using to make it have a swirly pattern,am thinking I can use a mild bleach and liquid soap solution to accomplish this. Has anyon on the board tried this ?
What you are describing is called 'discharge dyeing', and there is a wealth of information available on the web about it. There's also a lot here on QB as well, for example http://www.quiltingboard.com/quiltin...ml#post5364728 . The posts before and after that one also talk about discharging.

I've never heard of bleach plus liquid soap, but that doesn't mean it wouldn't work. If you want to try something safer than bleach, either Jacquard discharge paste or deColourant would be good. The only problem with them is that you cannot tell what your results will be until after you rinse it out. With bleach, you can stop the action fairly close to where you want it. You might also want to try Soft Scrub with Bleach and paint it on in the swirl you want. It has a thicker consistency than just bleach and is easier to control.

The bleach-water ratio is 50-50, and vinegar is NOT the stop bath of choice by those of us who frequently use this technique. The 'art quilt' thread linked above will give you more details, as will a web search. Have fun...discharge dyeing is quite addictive!
ghostrider is offline  
Old 08-02-2012, 12:34 PM
  #7  
Super Member
 
DogHouseMom's Avatar
 
Join Date: Jan 2011
Location: Knot Merrill, Southern Indiana
Posts: 5,781
Default

I have done it in small areas only - not a whole piece of cloth. I used a very small pait brush.

If you want to do specific sections only (as opposed to the entire piece of fabric) suggest that you wet the fabric with water first to prevent unwanted bleach bleed (it bleeds less when the surrounding fabric is already wet).

Whether you want a small area, or yardage ... strongly suggest that you try small pieces first to get whatever technique you are using down pat.

If I read your OP right ... you want to bleach out swirlly patterns on a large piece of fabric correct?

Fill a bowl with a bleach dilute, and work on your kitchen counter (providing it is something that can withstand bleach) next to the sink. Have the cold water running so you can stop the bleach action. Wet your fabric with cold water. Use a paintbrush the thickness of the swirls that you want. You might want to experiment with other "tools" other than a paint brush (for example, a hair brush will give a more "brushed" effect, a wadded up rag will give a more "mottled" effect, a rope mop will give a "swishy" effect - etc). But ... definitely experiment and play. Play with a smaller bit of your fabric to see if you get the color you want (remember some colors bleach out into other possibly unwanted colors - blacks become brown then yellow etc. - they rarely just "fade in value"). But also experiment the technique you use on other fabric to see if it is the effect that you want. You will also want to play with the amount of time the bleach sits on the fabric before you wash it out. Sometimes it takes a lot longer than one might expect.

I had good success with this method ... but bear in mind I was working on very small areas (1" squares to be exact). I also had quite a few 1" squares I could play with before I got what I wanted.

Good luck!
DogHouseMom is offline  
Old 08-02-2012, 12:56 PM
  #8  
Power Poster
 
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
Default

i use peroxide in my (stop-bath) after discharge dyeing- read through the tips-hints---it is important to stop the bleach after preforming the discharging- otherwise the bleach keeps eating away at the fabrics until you have holes- vinegar is not one of the recommended products to use.
ckcowl is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jan in VA
Links and Resources
20
01-28-2017 08:05 AM
Kyle
General Chit-Chat (non-quilting talk)
31
03-23-2016 10:51 PM
Serianas
Main
7
09-03-2015 10:10 AM
Favorite Fabrics
General Chit-Chat (non-quilting talk)
44
10-10-2013 07:46 AM
Recurver
Pictures
80
06-11-2013 09:19 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter