Elenor Burns - riping fabric
05-06-2010, 05:35 PM
#11
Super Member
Join Date: Feb 2010
Location: Illinois
Posts: 5,142
I tear if I have lots of fabric to divide. I hate to wash more than 2 1/2 yd pieces because it tends to wind up so badly in the dryer. I usually make about a 1/2" cut in the fold and tear from there to the edge of the selvage then clip.
05-06-2010, 06:31 PM
#12
Super Member
Join Date: Mar 2010
Location: New Zealand in the South Pacific
Posts: 1,115
Tearing cotton gives you a good straight of grain in spite of the furry edge, some fabrics are not put on the blocks straight to begin with and also some designs are not printed following the straight of grain, so tearing helps to see through all this. Polyesters do not tear well and in some cases do not tear at all.
Gal
Gal
05-06-2010, 07:10 PM
#17
Super Member
Join Date: Apr 2010
Location: Central Jersey & Calabash,NC
Posts: 4,024
The straight Grain of the fabric is called the WARP, it runs up and down - the same direction as the selvedge (sides). If you were to pull (stretch) the straight grain of the fabric, you will see that it won't give. Now, if you were to pull on the fabric sideways it will stretch. This is called the WEFT of the fabric. left to right-WEFT. Have you ever noticed that when you are sewing cut squares of fabric that some sides will stretch and some won't? Thats because you are sewing the sides that have been cut on the weft side. side to side, left to right along the width of the fabric not the length. Hope this helps. I learned this in a textile class when I was in high school. Anne
05-06-2010, 07:20 PM
#18
Senior Member
Join Date: Sep 2009
Location: Missouri
Posts: 634
Originally Posted by Honchey
The straight Grain of the fabric is called the WARP, it runs up and down - the same direction as the selvedge (sides). If you were to pull (stretch) the straight grain of the fabric, you will see that it won't give. Now, if you were to pull on the fabric sideways it will stretch. This is called the WEFT of the fabric. left to right-WEFT. Have you ever noticed that when you are sewing cut squares of fabric that some sides will stretch and some won't? Thats because you are sewing the sides that have been cut on the weft side. side to side, left to right along the width of the fabric not the length. Hope this helps. I learned this in a textile class when I was in high school. Anne
This is why alot of teachers recommend using the length of the fabric for borders, doesnt stretch as much.
Thread
Thread Starter
Forum
Replies
Last Post
maryfrang
Offline Events, Announcements, Discussions
3
09-02-2014 03:54 PM
