Enlarging a Bargello pattern?
#1
Enlarging a Bargello pattern?
I found a Bargello Quilt Pattern made from 2 Jelly Rolls, about 63 x96.
http://letsquiltsomething.blogspot.c...kona-roll.html
I want to make it about 100 x 110. What will adding another jelly roll do?
Increase Length or Width.
Adding borders will not be enough to get me to where I want.
Thanks.
http://letsquiltsomething.blogspot.c...kona-roll.html
I want to make it about 100 x 110. What will adding another jelly roll do?
Increase Length or Width.
Adding borders will not be enough to get me to where I want.
Thanks.
#2
Senior Member
Join Date: Jan 2011
Location: Michigan
Posts: 426
Judging by the looks of all of the viewers versus responses, nobody knows this answer. Nor do I, however, I will be vigilant as I'm interested in the answer. Good luck when you do it, and please post a picture. I don't have a camera, so I don't post pictures. I sure enjoy looking at all of them tho'.
#4
Power Poster
Join Date: Dec 2010
Location: Michigan
Posts: 11,276
It could work. First of all, the number of strips IN THE ROLL will determine the length. Although most jelly rolls have around 40 strips, they can vary widely. Sewn into the strip sets you loose 1/2" per strip in the seams and so yield 2" per strip. To get the 96" length quoted, the author would have had to use rolls with 48 strips (really weird size roll). If you read all the posts on the tutorial, several people question her finished size. for a quilt 110" long, you would have to use 55 different strips.
The strips are about 40" long, but because you sub cut your tube into all those different widths, you loose a lot in seam allowances. The 2 40" tubes she used made a quilt about 62" wide. So each jelly roll gives you about 31" in width. 3 sets would give you about 93". To get the additional 7" you would need an entire additional roll, but you would only use a portion of it.
So to get the size you want, you would not only need 3 rolls, but would also have to augment the rolls with additional 2.5" strips to bring the count up to 55.
Adding borders would be way easier.
The strips are about 40" long, but because you sub cut your tube into all those different widths, you loose a lot in seam allowances. The 2 40" tubes she used made a quilt about 62" wide. So each jelly roll gives you about 31" in width. 3 sets would give you about 93". To get the additional 7" you would need an entire additional roll, but you would only use a portion of it.
So to get the size you want, you would not only need 3 rolls, but would also have to augment the rolls with additional 2.5" strips to bring the count up to 55.
Adding borders would be way easier.
#5
Super Member
Join Date: Aug 2011
Location: kansas
Posts: 6,407
besides what PaperPrincess said, you probably would want to first sketch the design out so that you know the widths to add on either side to get the wave effect. I did basically the same thing you are attempting on a bargello--actually foudn that it's easier if you add the addition width into the block cuts (so instead of a 2.5" cut it would be 3", etc) but not sure how that impacts the use of the jelly rolls.
#6
Jelly rolls are not always 2 1/2 inches wide. I'm fighting with one right now that is averaging 2 3/8. It was supposed to be a dresden plate that I bought the template for at MSQC. What a mess.
#8
Super Member
Join Date: May 2012
Location: Central Wisconsin
Posts: 4,391
I've seen patterns for bargello quilts that use smaller sections, as in a quarter of the quilt is made at a time. Then the four quarters are sewn together. I'm sure someone knows where to find such a pattern. You could make your quilt as big as you wanted.
#10
Member
Join Date: Nov 2011
Location: USA
Posts: 8
Thread
Thread Starter
Forum
Replies
Last Post