A Great Find At Harbor Freight
#34
Senior Member
Join Date: May 2007
Posts: 397
Great idea. Just what I need to remove the cover for my bobbin carrier. The screw driver that came with the machine is a little too tall. Besides that, I bent it trying to tightened the screw in my presser foot adaptor so that it won't work loose, and I really can't manage those "stubbies" that I ordered.
#35
Super Member
Join Date: Jan 2011
Location: Small town in Northeast Oregon close to Washington and Idaho
Posts: 2,795
I ordered some really small screw drivers and they are tiny and hard to work with, but these look better. I wonder if I can get them online. I've never seen a Harbor Freight store in my life.
#37
Junior Member
Join Date: Aug 2010
Posts: 135
If you are concerned about the magnet there is another screwdriver you can get.....got to the hardware dept. and
ask for an offset screwdriver they come in differant sizes...they look like this ...think of a line about 4 inches long
that would be the middle....then there is a line on one end facing up (that is a screw driver...about 1/4 inch....on the
other end is a line facing down (that would be another screw driver.....they work great....before working in digital switching I worked in mechanical switching....used these all the time & keep 2 different ones in my sewing machine drawer...always...
Peg
ask for an offset screwdriver they come in differant sizes...they look like this ...think of a line about 4 inches long
that would be the middle....then there is a line on one end facing up (that is a screw driver...about 1/4 inch....on the
other end is a line facing down (that would be another screw driver.....they work great....before working in digital switching I worked in mechanical switching....used these all the time & keep 2 different ones in my sewing machine drawer...always...
Peg
Thread
Thread Starter
Forum
Replies
Last Post