Have you ever "worn out" a 1/4" foot?
#21
Super Member
Join Date: Jan 2011
Location: Nawth o' Boston
Posts: 1,879
I wonder if it is the ankle, if you couldn't put in a sort of washer or gasket which would tighten it up...I have notice a couple of my feet being a big wiggly. Think I'll try it.
#22
Power Poster
Join Date: Jan 2011
Location: Southern USA
Posts: 16,421
The metal guide broke off one of my 1/4" feet. I like it better without the guide. I found if I make my 1/4" guide using tape or whatever it works best for me to have it at least 1/8" high and perfect at 1/4" high.
#23
Super Member
Thread Starter
Join Date: Aug 2011
Location: kansas
Posts: 6,407
Yes--I love it! It's been pretty maintenance free despite lots of sewing time. I've not only pieced on it, but also FMQ. I don't do much clothing sewing, but have used it for a flower girl dress that involved lots of specialty feet. Have to say that I can never remember how to use the more complex ones since only use them rarely. I have had difficulty with my automatic threader---but I have difficulty with that on my Singer too, so it may be more me than the machine as a friend with the same machine says she's never had any difficulty with the threader.
#25
Super Member
Join Date: Dec 2009
Location: Somewhere in Time
Posts: 2,697
I have two 1/4" feet and seldom use either one. Tried one at the Mystery Retreat last week and my seams were too large. We eventually found my Painter's Tape was an accurate 1/4" and the foot was more like 3/8". Today I will be removing that side flange from my 1/4" feet, it is useless.
#26
Member
Join Date: Aug 2010
Location: N of Dallas tx
Posts: 37
I also have that same machine and I also noticed that there was some play on the 1/4" foot. I could wiggle the flat of the foot
I found below the snap on part there is a teeny screw. I got my smallest screwdriver and tightened that screw (its right above the flat part of the foot, right behind the needle when down). You have to raise the needle to see it and tighten the screw. This seemed to help take the wiggle out of the foot and helps my true 1/4 seam.
Try that-cheaper than a new foot-too late for that tho-one can always have a spare.
Good luck
Jill M
I found below the snap on part there is a teeny screw. I got my smallest screwdriver and tightened that screw (its right above the flat part of the foot, right behind the needle when down). You have to raise the needle to see it and tighten the screw. This seemed to help take the wiggle out of the foot and helps my true 1/4 seam.
Try that-cheaper than a new foot-too late for that tho-one can always have a spare.
Good luck
Jill M
#27
Super Member
Thread Starter
Join Date: Aug 2011
Location: kansas
Posts: 6,407
I also have that same machine and I also noticed that there was some play on the 1/4" foot. I could wiggle the flat of the foot
I found below the snap on part there is a teeny screw. I got my smallest screwdriver and tightened that screw (its right above the flat part of the foot, right behind the needle when down). You have to raise the needle to see it and tighten the screw. This seemed to help take the wiggle out of the foot and helps my true 1/4 seam.
Try that-cheaper than a new foot-too late for that tho-one can always have a spare.
Good luck
Jill M
I found below the snap on part there is a teeny screw. I got my smallest screwdriver and tightened that screw (its right above the flat part of the foot, right behind the needle when down). You have to raise the needle to see it and tighten the screw. This seemed to help take the wiggle out of the foot and helps my true 1/4 seam.
Try that-cheaper than a new foot-too late for that tho-one can always have a spare.
Good luck
Jill M
#28
Super Member
Join Date: Dec 2009
Location: Somewhere in Time
Posts: 2,697
Used a needle-nose plier and yanked the flange off and now I have a real 1/4" foot -- perfect 1/4" seams. Bonus, if I line the center edge of the left side of the foot with the pencil line for HST's -- those are easier to stitch as well because the needle stitches slightly to the right of the pencil line.
#29
Member
Join Date: Jul 2015
Location: Lisbon, Portugal
Posts: 61
Yes--I love it! It's been pretty maintenance free despite lots of sewing time. I've not only pieced on it, but also FMQ. I don't do much clothing sewing, but have used it for a flower girl dress that involved lots of specialty feet. Have to say that I can never remember how to use the more complex ones since only use them rarely. I have had difficulty with my automatic threader---but I have difficulty with that on my Singer too, so it may be more me than the machine as a friend with the same machine says she's never had any difficulty with the threader.
Thread
Thread Starter
Forum
Replies
Last Post
J Miller
For Vintage & Antique Machine Enthusiasts
18
12-25-2013 07:24 PM
bearisgray
General Chit-Chat (non-quilting talk)
19
06-14-2010 04:02 PM