Having a problem with My Ellisomo
#1
![Default](/images/icons/icon1.gif)
It is telling me that the upper thread isn't threaded correctly.
I have done this over and over. What do you think? This is a brand new machine and had been working great.
At first the thread worked okay, then it wasn't catching the bottom thread, then I rethreaded it again and again, now it tells me I am not threading it right.
Do you think the timing is off, or maybe the tension is off?
I have done this over and over. What do you think? This is a brand new machine and had been working great.
At first the thread worked okay, then it wasn't catching the bottom thread, then I rethreaded it again and again, now it tells me I am not threading it right.
Do you think the timing is off, or maybe the tension is off?
#2
![Default](/images/icons/icon1.gif)
The Ellisimo has auto tension and seems to do a good job so doubt it is the tension. Did you rethread the bobbin as well? Also make sure that the thread isn't getting caught on the spool if you are using one that has the little slot in the top of the spool. Another option is to turn the machine off and let it reset everything to default.
Good luck and let us know when you find out what the problem is. (I have an Ellisimo so will be watching!)
Good luck and let us know when you find out what the problem is. (I have an Ellisimo so will be watching!)
#4
![Default](/images/icons/icon1.gif)
Nancy; I usually get this warning when I am attempting to auto thread the needle. I find my thread has slipped out of that last spot that holds the thread until it auto threads. My machine is new also... nothing else pops up erratically so I always assume it is 'ME'. LOL
I hope this helps you.
I hope this helps you.
#8
![Default](/images/icons/icon1.gif)
I have been attempting to post the web address for yahoo groups so you can join the Babylock Ellisimo group. I continue to get an 'content error message' that says I have to have my message approved by administrator. Soooo, try going to yahoo groups, type in Babylock Ellisimo and you should find the Babylock group. Perhaps you might find some more answers to your questions. Hope this helps.
#9
![Default](/images/icons/icon1.gif)
Well part of the problem was #1 it wasn't picking up the botton thread and wasn't liking the way I thread it.
I finally called the dealer, he had me take out the bobbin case, and when I did I found a ton of stuff under it. I tried twice to put it in and it wasn't working. Part of the problem was I didn't have the bobbin case lined up. I had checked the needle and changed that, so after I took it a part 3 times and put it back together, it is working great. Now I know what to look for. Believe me you need to take the bobbin case apart and clean under it.
I finally called the dealer, he had me take out the bobbin case, and when I did I found a ton of stuff under it. I tried twice to put it in and it wasn't working. Part of the problem was I didn't have the bobbin case lined up. I had checked the needle and changed that, so after I took it a part 3 times and put it back together, it is working great. Now I know what to look for. Believe me you need to take the bobbin case apart and clean under it.
#10
![Default](/images/icons/icon1.gif)
I clean my machine every time I start a new project, more often if I am sewing something that has a lot of lint, like flannel.
Just a note of caution: Never use canned air to clean your machine. It will only blow the dust further into the machine and cause you problems.
Just a note of caution: Never use canned air to clean your machine. It will only blow the dust further into the machine and cause you problems.
Thread
Thread Starter
Forum
Replies
Last Post
hospicenurse
General Chit-Chat (non-quilting talk)
10
03-17-2011 08:31 AM
craftybear
General Chit-Chat (non-quilting talk)
42
08-04-2010 10:17 AM
Toto's Mom
General Chit-Chat (non-quilting talk)
10
04-26-2010 02:43 PM