meanmom

The running stitch with cardboard or template plastic is my favorite method. I iron it with lots of best Press. For small circles the hardware store is a great source. I buy the thinnest washers I can find for smaller circles. They work really well. Just let them cool a little before you remove them.

trolleystation

Cut a fabric circle and one of very lightweight interfacing. Sew right sides together with 1/8th inch seam. Cut a slit in interfacing. Turn right sides out. Iron flat. Remove some of the interfacing or leave as is. Easy to stitch down in the center of Dresden plate. The center will be a tiny bit firmer but the results are wonderful.

Lady Diana

I think I learned the way I do it from Nancy Zieman. I use the light interfacing method. I use fusible interfacing.
Sew around your circle, making sure that the side with the fusible is towards the right side of the fabric circle. cut the slit in the interfacing, turn and use a wooden or plastic seam presser and run around the edge, BECAUSE YOU CANNOT PRESS THE CIRCLE DUE TO THE FUSIBLE. When you turn the circle the fusible will be on the outside.
Then center the circle on your "plate", NOW YOU CAN PRESS. Most of the time, I leave the full interfacing circle on the back....some people trim to a 1/4 inch, leaving a small amount all around the edge to fuse down. I have found the light weight fusible interfacing doesn't add that much to the weight.

Lady Diana

I forgot to mention in my previous response. To get the perfect circle, I place freezer paper in my printer, draw a circle from "shapes" in word and make several sizes, then print. I cut the chosen circle out, fuse it down to my fabric, cut 1/4 inch around the freezer paper circle. I'm not good at drawing or even tracing perfect circles, so this works for me. I am good at the quarter inch...been quilting too long, I guess. Ha! Some people use glasses, jar lids, compasses etc. ( still don't get those straight) You can use the freezer paper circle numerous times, just peel and press on the next fabric piece. Someone told me in class that they make a two pencil little holder that when you put the pencils together in it, you can trace around anything and it automatically marks a 1/4 inch. That would be handy. Another lady at the guild said she just tapes two pencils together. I guess that work too.

Ariannaquilts

I have made the circle with success using the method described by all the other ladies, you just have to find the one that works best for you. I hope you are successful in making this as dresden's are so much fun to do.

d.rickman

To make your own template for a circle......Measure the center of your dresden petals, add 1/4 inch all around that measurement to allow for stitching to make the center fit properly. Next Find a round object, plate, vase, cannister etc. something around your home that is a circle around the same size as you require, and make a template by tracing around the object with a pencil onto cardboard or the waxie side of freezer paper or another piece of your fabric, or posterboard. When making your template - Make certain you have added on a 1/4 inch around the circle for stitching. Once you have done that follow the instructions of Rhonda K, as in the quote above.

I hope this helps you.

madamekelly

This is the method I use, but anytime I am sewing “in the round”, I shorten the stitch length and use the slower gears (setting) on my sewing machine. It just makes the circular stitching much easier.

madamekelly

I draw my circles on the smooth side of my thin interfacing with a washable marker, and then layer the bumpy side to right side of the fabric and pin between circles with quilting safety pins. For me, this is easier than trying to stitch, and hold a small piece in place. For dresdens I draw several on a piece of interfacing, and stitch them all before cutting them out.