leighway

I agree with this. The very BEST pot holder I ever had came from Wms.Sonoma and was imported from England. It was several layers of terry cloth quilted together and bound. If you want to use the Insulbright then pad it with a couple of layers of old towel cut up. I'd use the terry cloth over the batting, especially because the terry, being old would have been preshrunk.

Eliebelle

I make mine with 1 layer insulbright and 1 layer w & w - have never had a problem! I also use this mix for mug rugs so the heat from coffee doesn't mark the furniture.

Annz

I double the insulbrite in the holder and use 4 layers in the mitt.

deanneellen

'At least one layer of cotton batting is recommended with Insul~Bright when used as Oven Mitts or Pot Holders. Insul~Bright is heat-RESISTANT, NOT heat-proof.'

This is a quote from the Insul-bright website.

earthwalker

I have never used insulbrite. I make potholder innards out of old shrunken sweaters (wool) and bits of towel (double layer).

romanojg

Embroidery library has a tutorial on this they use insulbright and the shiny fabric that goes on ironning board covers. Yes, they make theirs using embroidery but the concept is still the same.

nhweaver

To remove items from the oven, I now use Ov Gloves. They keep this klutz (one thanksgiving I got 5 stitches cutting butter with a knife), they are made from kefvlar (sp???) if you can kefvlar fabric, I would recommend using that as a filler.

QultingaddictUK

http://www.warmcompany.com/pdfs/ibeng.pdf I make mine to this pattern but the lining fabric is a good quality calico, which I use heaps of for not only these but backing for place-mats and linings for heavy duty totes.

rj.neihart

My mother sent me a hand mit for the oven and it's like having a think piece of cloth on when I take something out of the oven. Talk about almost burning my fingers! She used felt - so that material doesn't work. I think when I make some oven mits or pot holders, I'll use something a little more heat resistant.

roadrunr

I also use old towels in hot pads. I usually use 2 or 3 layers and it seems to work fine.