Help please!
#1
Member
Thread Starter
Join Date: Jan 2021
Location: Bikini Bottom
Posts: 1
Help please!
Hello everyone, i recently got out my sewing machine after roughly 7 months of not using it. I lost my needle clamp screw!!
Are there any alternatives to using one? Or any easy replacements?
Are there any alternatives to using one? Or any easy replacements?
#2
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,535
I can’t think of anything to replace the needle screw clamp. Anything that you think might fit, may strip the threads in the machine. I would look to a repair shop of your machine brand for a replacement or on the net.
#4
Senior Member
Join Date: Sep 2013
Location: Saskatchewan
Posts: 838
I agree - don't try to find a substitute unless you're willing to gamble your machine.
You should be able to buy one online for under $20 (max). If the machine is worth $20 for you, don't risk messing up the threads - a machine that can't hold a needle in is useless!
You should be able to buy one online for under $20 (max). If the machine is worth $20 for you, don't risk messing up the threads - a machine that can't hold a needle in is useless!
#5
Super Member
Join Date: Nov 2010
Location: Utah
Posts: 2,093
Where I work, if you bring your machine to the shop, we just go through our loose screws and try a few thumb screws until we find the right one, and give it to you. Take it to the shop. I'll bet they have an extra that won't cost much.
#6
Super Member
Join Date: Jul 2010
Location: Massachusetts
Posts: 1,097
#8
Super Member
Join Date: Sep 2011
Location: Carroll, Iowa
Posts: 3,477
I lost my needle clamp screw at a quilt retreat but luckily someone had a spare for the same brand machine so I was saved that time. I decided then to make sure I had spares of such items like screws, needles, scissors, etc. so I'm not placed in that position again. I was amazed how expensive a little screw is though.....$10 and here I thought I was being generous paying her $10 for the screw she gave me.
#9
Power Poster
Join Date: Jan 2011
Location: Southern USA
Posts: 16,383
Most all needle screws and pressure foot screws will fit all machines. I have used a an old Singer needle screw on a newer Janome. The pressure foot screw have different size heads but the threads are the same in most cases. The bigger the head some feet like a walking foot won't fit exactly right.