Go Back  Quiltingboard Forums > Main
Is it heresy >

Is it heresy

Is it heresy

Thread Tools
 
Old 03-01-2018, 06:54 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Jun 2010
Location: choctaw oklahoma
Posts: 291
Default Is it heresy

...if I use sheets for quilt backing? I hand quilt so I like solid backing so the quilting is more visible. The price is right if I find sheets at Ross or on Groupon.
What do you see as the pros and cons!
laurac is offline  
Old 03-01-2018, 07:03 AM
  #2  
Power Poster
 
Join Date: May 2009
Location: NY
Posts: 10,590
Default

Not Heresy and done quite often. The only thing I would avoid are the uber high thread count sheets. The weave is so dense it might give you some difficulty needling, much like batiks can be a bit tougher to hand quilt due to their denseness.

I do know a lot of LA quilters don't like to use sheets because the longarm needle is much bigger than a regular SM needle and it can have a tendency to actually break the warp or weft threads of the sheet rather than sliding between them (on the super high thread count ones) . There is also a bit of disconcerting "thwock thwock thwock" sound with every stitch. But for handquilting you shouldn't have that issue.

Many here highly recommend using vintage sheets from thrift stores if you can find them.

I have used flannel sheets too!
feline fanatic is offline  
Old 03-01-2018, 07:03 AM
  #3  
Super Member
 
Annie68's Avatar
 
Join Date: Jul 2011
Location: Maine
Posts: 1,469
Default

The cons that I see would be that because the thread count is much higher in sheets than quilt fabric, it will be difficult to hand quilt. Having said that I've heard of lots of people who do go ahead and hand quilt with sheets. I'd say trim a piece off and see how it handles for you, good luck!
Annie68 is offline  
Old 03-01-2018, 07:14 AM
  #4  
Super Member
 
Join Date: Nov 2009
Location: Ontario, Canada
Posts: 1,991
Default

I am a longarm quilter and use sheets as backing all of the time with no problems. My APQS Lenni can not tell the difference between sheets and quilting fabric. I quilt them all, all cotton, poly/cotton and flannel. I won’t use microfibre sheets as I don’t like the feel of them. Sheets do not warp or break my needle and my needle has not broken or warped the sheet. For me, sheets make a very affordable backing for quilts that are going to be used every day. You would need to choose a sheet that wasn’t as tightly woven for hand quilting or say a lot of bad words trying to get your needle through easily.
Shelbie is offline  
Old 03-01-2018, 07:28 AM
  #5  
Power Poster
 
Join Date: May 2009
Location: NY
Posts: 10,590
Default

Originally Posted by Shelbie View Post
I am a longarm quilter and use sheets as backing all of the time with no problems. My APQS Lenni can not tell the difference between sheets and quilting fabric. I quilt them all, all cotton, poly/cotton and flannel. I won’t use microfibre sheets as I don’t like the feel of them. Sheets do not warp or break my needle and my needle has not broken or warped the sheet. For me, sheets make a very affordable backing for quilts that are going to be used every day. You would need to choose a sheet that wasn’t as tightly woven for hand quilting or say a lot of bad words trying to get your needle through easily.
Shelby you misunderstood my post. The needle doesn't break and nothing is warped. Sheets are woven. Warp is the term used for the threads that are mounted lenghwise on the loom and weft are threads that weave over and under the warp threads which forms the fabric. All woven fabric is made this way. It takes a very trained eye and you have to be looking for it specifically but any longarm needle, which is much larger as you know, can, and often will break either the warp or weft thread rather than sliding between them as most needles do with normal quilting fabric. This is especially true of high thread count sheets which is probably why many people, especially longarmers don't like to use them. You won't see a hole but if you examine carefully you will see what often looks like a "run" in the fabric. Much like us old school garment sewers would find the straight of grain by pulling a single thread. This only happens with high count sheets. Next time you quilt using a high count sheet examine the back very carefully with magnifyer, I suspect you will find a few.
There is no reason you can't continue to use sheets but if you quilt for others it would be a disservice to your clients not to mention the possiblity of this happening and let them make the decision. If you only quilt for yourself and don't care, then it doesn't matter. The damage is so minute it really won't effect how the quilt wears over time. It may be called out in a show.
feline fanatic is offline  
Old 03-01-2018, 07:54 AM
  #6  
Power Poster
 
sewbizgirl's Avatar
 
Join Date: Oct 2010
Location: Mississippi
Posts: 25,991
Default

I use sheets when I can get them. Using sheets for backing is nothing new... been done forever!
sewbizgirl is offline  
Old 03-01-2018, 07:59 AM
  #7  
Power Poster
 
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,460
Default

​If you are hand quilting, I would wash the sheet first to make it softer. The stiffness of brand new sheets can make it difficult to get small hand stitches.
Tartan is offline  
Old 03-01-2018, 08:35 AM
  #8  
Administrator
 
patricej's Avatar
 
Join Date: Nov 2006
Location: Southeast Georgia, USA
Posts: 9,093
Default

the very first quilt i ever made, [mumble mumble] years ago not only had a sheet on the back, i used an old blanket instead of "official" batting.
hand quilted it, too.

i didn't say it was easy to HQ.
didn't say there were tiny stitches or a lot of quilting.

just said i managed to finish it. lol

used that sucker for many years until it finally went to the pet shelter.
__________________
  • necessity is the mother of invention. lazy is the crazy aunt.
  • for issues regarding the reminder emails, please contact [email protected]
patricej is offline  
Old 03-01-2018, 08:56 AM
  #9  
Super Member
 
Join Date: Aug 2010
Location: Central Iowa
Posts: 2,334
Default

if you like using the sheets and happy how your lovely quilting looks why not I use sheets and do not have any cons about it.
newbee3 is offline  
Old 03-01-2018, 09:51 AM
  #10  
Senior Member
 
Join Date: Apr 2017
Location: Gilbert, AZ
Posts: 985
Default

Not heresy at all. I use sheets for backing all the time, except I get them at the thrift store or from my used ones that are looking rough around the edges. I even use the vintage blends with no problems. (Audible gasp from the quilting police). I hand quilt and avoid the high thread count sheets. I made some small test samples, hand and machine quilted them and threw them in the washer/dryer to test. Nothing blew up or shrank funny, so I figured I was okay. Cheap backing fabric and no extra seams to hand quilt through.
Faintly Artistic is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
J Miller
For Vintage & Antique Machine Enthusiasts
20
02-05-2013 04:11 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter