How do you do it
#1
Senior Member
Thread Starter
Join Date: May 2012
Location: Traverse City, MI
Posts: 405
How do you do it
Used heat and bond on a row of the row by row pattern. It wouldn't stay stuck and was very difficult to sew down. Tried a smaller needle which didn't work. I bought several yards of it but may just throw it away unless some one has a suggestion on how it worked for you. Steam a seam to be back in my LQS in October but I hate to throw 4 yards of the other away.
#2
Super Member
Join Date: Feb 2013
Posts: 1,340
I'm wondering if Heat and Bond has an expiration date. I bought a package of it awhile back and it hung around for awhile before I used it and I couldn't get it to stick. I finally just got my iron as hot as possible and at least got it to partially stick and sewed the loose parts first. Let the iron sit on it for a few seconds then remove it and let it cool off before checking to see if it stuck. Good luck. That is very frustrating, I know.
#6
Super Member
Join Date: Jul 2010
Location: Jeffersonville, In
Posts: 2,621
It is recommended that you wash the fabric first to remove the sizing.
The last time I checked the Warm Company website, they were still saying Steam a seam would be available in the fall. I can hardly wait.
The last time I checked the Warm Company website, they were still saying Steam a seam would be available in the fall. I can hardly wait.
#8
Power Poster
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
There are a number of different 'Heat & Bond's '...it is important to make sure you get the. Heat & Bond Lite. Which is made to be sewn, is not stiff. The regular heat & bond is more a craft item, non-sewable and not for laundered projects. Also, unlike steam a seam which you use steam for Heat & Bond is fused with a dry iron, so, if you used steam that could be why it did not hold. I've tried most of the fusible products on the market and for me Heat & Bond Lite is my favorite, sorry you had a problem with it. Did your (yards of it) not have the instructions with it? You can visit the website for the usage instructions. I'm at work & cannot check for sure but I know you have to hold the iron in each spot for something like 4-8 seconds, then lift, reposition iron... And use a dry iron on cotton setting. One thing though- you didn't mention what fabric you were using, I have found some batiks do not take well to fusibles, prewashing with detergent- no fabric softener and no sizing or starch added to the fabric gives the best outcome with all of the fusibles
#9
Super Member
Join Date: Apr 2011
Location: Midwest
Posts: 5,051
#10
Super Member
Join Date: Apr 2011
Location: Midwest
Posts: 5,051
There are a number of different 'Heat & Bond's '...it is important to make sure you get the. Heat & Bond Lite. Which is made to be sewn, is not stiff. The regular heat & bond is more a craft item, non-sewable and not for laundered projects. Also, unlike steam a seam which you use steam for Heat & Bond is fused with a dry iron, so, if you used steam that could be why it did not hold. I've tried most of the fusible products on the market and for me Heat & Bond Lite is my favorite, sorry you had a problem with it. Did your (yards of it) not have the instructions with it? You can visit the website for the usage instructions. I'm at work & cannot check for sure but I know you have to hold the iron in each spot for something like 4-8 seconds, then lift, reposition iron... And use a dry iron on cotton setting. One thing though- you didn't mention what fabric you were using, I have found some batiks do not take well to fusibles, prewashing with detergent- no fabric softener and no sizing or starch added to the fabric gives the best outcome with all of the fusibles
sandy
Thread
Thread Starter
Forum
Replies
Last Post
ruby2shoes
Main
25
09-20-2015 04:01 PM
Fab-ra-holic
General Chit-Chat (non-quilting talk)
42
06-22-2011 09:23 AM
imjustme
Main
13
09-29-2009 03:24 PM