How to stop puckering?
#1
I'm making a quilt throw for my dad and I used spray basting and althought I was very careful to get the backing stretched out good when I sprayed and sandwiched it, when I was doing my quilting, the backing started to pucker in places. I just went on and quilted it, too frustrated to seam rip it and try to get it unpuckered. I used a walking foot and quilting gloves and thought I did all I could to keep that from happening.. What did I miss? Should I not use the spray basting? :cry:
#2
Super Member
Join Date: Mar 2010
Location: North Texas
Posts: 8,710
Sometimes, no matter how hard we work and all the extra care we take to make this not happen, it does anyway. Hope you can "quilt it out", Cathy MIller, the singing quilter, wrote a song called "You can quilt it out". A funny but goodie. YOu can google her website and hear it. CHin up, it happens to the best of them. WHy else would there be a song? Happy quilting.
#3
OK, I know it is not funny, have had it happen myself. I am guessing that your back was not as flat as you thought. You might try using masking tape to secure to the floor for spray basting.
Now for the funny part: How to stop puckering? Botox.
Now for the funny part: How to stop puckering? Botox.
#5
Power Poster
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
some times even with the spray you still need to either baste of pin around the edges. all the moving around pulls the sprayed layers around too, pinbasting the edges helps keep you together. I think the spray is best used on small projects, like wall hangings and table runners, it seems there are always problems when using it on larger projects. it helps to start in the middle and work your way out smoothing as you go. i hope it turns out ok when you are finished. it does take practice. I have never had any luck with the spray on anything larger than a table runner and i still had to baste all the way around it.
#6
Super Member
Join Date: Jul 2010
Location: Glenmoore, PA
Posts: 7,941
Originally Posted by ckcowl
some times even with the spray you still need to either baste of pin around the edges. all the moving around pulls the sprayed layers around too, pinbasting the edges helps keep you together. I think the spray is best used on small projects, like wall hangings and table runners, it seems there are always problems when using it on larger projects. it helps to start in the middle and work your way out smoothing as you go. i hope it turns out ok when you are finished. it does take practice. I have never had any luck with the spray on anything larger than a table runner and i still had to baste all the way around it.
#7
I also use the spray basting with mixed results. Sometimes I get puckers, and sometimes not. This is probably a no no, but when I start to get a pucker I actually turn the quilt over and machine quilt it to ease the pucker out. That way, I don't get an actual fold which makes me very very crazy!!!
#8
Banned
Join Date: Mar 2010
Location: Sturbridge, Ma
Posts: 3,992
I spray basted a less than twin size recently and had lots of wrinkles on both the back and front. I took it to the person who demonstrated spray basting and asked him what to do about it. He said to press with hot iron. That would soften up the spray and enable me to smooth it out. I did this and it seems to work. I havn't started quilting yet but will iron again before I do. Also will pin with straight pins around the area I am qulting. Each square gets a motif. I was going to quilt in the ditch but pressed seams open and didn't have any ditches to quilt in so have to do a bit more elaborate quilting.
So, try ironing and smooth. ALSO, as you are quilting be aware of the back and smooth as much as possible.
So, try ironing and smooth. ALSO, as you are quilting be aware of the back and smooth as much as possible.
Thread
Thread Starter
Forum
Replies
Last Post
nanna-up-north
For Vintage & Antique Machine Enthusiasts
13
10-28-2013 12:53 PM
lisalisa
General Chit-Chat (non-quilting talk)
54
02-19-2011 11:01 AM