The Ironing Board Trick
#11
Member
Join Date: Nov 2006
Location: Shelton, Fairfield County, CT
Posts: 60
Hi Ruth Camp
Imagine your sewing machine and the face of a clock. When you sew, you have your machine in 2:45 position and parallel to your body; the needle side of your sewing machine is the #9. Are you following me? If you are not, do not keep reading because you will be more confused! Now, rotate your sewing machine to the 12:30 position and perpendicular to your body; the needle side is the #6 and the closest to you. Does it make sense now?
Lucia
Imagine your sewing machine and the face of a clock. When you sew, you have your machine in 2:45 position and parallel to your body; the needle side of your sewing machine is the #9. Are you following me? If you are not, do not keep reading because you will be more confused! Now, rotate your sewing machine to the 12:30 position and perpendicular to your body; the needle side is the #6 and the closest to you. Does it make sense now?
Lucia
#12
Member
Join Date: Nov 2006
Location: Shelton, Fairfield County, CT
Posts: 60
Hi Ruth Camp
Imagine your sewing machine and the face of a clock. When you sew, you have your machine in 2:45 position and parallel to your body; the needle side of your sewing machine is the #9. Are you following me? If you are not, do not keep reading because you will be more confused! Now, rotate your sewing machine to the 12:30 position and perpendicular to your body; the needle side is the #6 and the closest to you. Does it make sense now?
Lucia
Imagine your sewing machine and the face of a clock. When you sew, you have your machine in 2:45 position and parallel to your body; the needle side of your sewing machine is the #9. Are you following me? If you are not, do not keep reading because you will be more confused! Now, rotate your sewing machine to the 12:30 position and perpendicular to your body; the needle side is the #6 and the closest to you. Does it make sense now?
Lucia
#16
Member
Join Date: Jan 2007
Posts: 7
The three pics I have sent should help you see how the machine sets. Hope it helps.
I've been quilting for thirt-nine years and this is the best way of quilting.
If your sewing machine is on a large table 6 to 8 feet long, just turn your machine 1/4 turn to the right like in the picture attached.
Di
I've been quilting for thirt-nine years and this is the best way of quilting.
If your sewing machine is on a large table 6 to 8 feet long, just turn your machine 1/4 turn to the right like in the picture attached.
Di
This picture is a veiw of how you would normally see your machine if your were sewing.
[ATTACH=CONFIG]1225[/ATTACH]
This last veiw basically shows where you would set at the machine, using a chair for example. Sorry about the mess, two of my grandkids just moved in so everything is arye.
[ATTACH=CONFIG]64163[/ATTACH]
This picture is a veiw of how the machine should look if setting at the machine to quilt. Turn the machine 1/4 turn to the right.
[ATTACH=CONFIG]64501[/ATTACH]
#17
Thank you for sending the pics. I have had so much going on with the forum, the holidays, the shop oh i could go on, but why bother? Trust me I just forgot. :roll: The only difference is my machine sits in the well of the sewing table, with one table in front and one behind, so that I have a flat surface on which to move the quilt. As I stated previously, I roll the quilt sandwich towards the center and begin quilting in the center. As I complete the center area I roll towards myself and continue in this manner until there is nothing left. At this point reroll the finished part of quilt and reinsert the unfinished side in the keyhole. Continue to roll towards yourself until the quilting complete.
Now with the pictures you sent, my words may actually make some sense. :lol: Thanks again.
Now with the pictures you sent, my words may actually make some sense. :lol: Thanks again.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
15
04-07-2013 02:59 AM
craftybear
Links and Resources
1
08-12-2011 06:51 PM
craftybear
Links and Resources
7
06-02-2011 04:39 PM
craftybear
Links and Resources
14
11-28-2010 09:07 AM