Problem with Embroidering on Fleece
#1
I know some of you do machine embroidering and I need help with a problem I am having. I thought I would do something simple to start with since this is all new to me. I wanted to make some simple scarves with orchids embroidered on the ends. I hooped tear away stabilizer then used a spray adhesive to secure the fleece and finished the sandwich with water soluble stabilizer on the top per my sewing machine shop owner’s instructions. What happens is the top thread seems to bunch up in one spot and the bottom stabilizer tears and then the top thread gets all tangled around the bobbin and punches a hole in the fabric. Any suggestion to what I am doing wrong?
#4
Power Poster
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
are you using the correct needle? you need a knit/stretch needle. loosen the top tension just a little and lengthen your stitch length. what kind of embroidery machine do you have? if its a viking...make sure you use the sewing advisor and put the fabric setting on (heavy knit) that will ease the pressure on the foot so you get less 'drag'.
good luck...try a practice (sandwich) until you get your settings adjusted. but changing the needle (and cleaning the machine if it's been awhile) may fix the problem
good luck...try a practice (sandwich) until you get your settings adjusted. but changing the needle (and cleaning the machine if it's been awhile) may fix the problem
#5
Originally Posted by juneayerza
I know some of you do machine embroidering and I need help with a problem I am having. I thought I would do something simple to start with since this is all new to me. I wanted to make some simple scarves with orchids embroidered on the ends. I hooped tear away stabilizer then used a spray adhesive to secure the fleece and finished the sandwich with water soluble stabilizer on the top per my sewing machine shop owner’s instructions. What happens is the top thread seems to bunch up in one spot and the bottom stabilizer tears and then the top thread gets all tangled around the bobbin and punches a hole in the fabric. Any suggestion to what I am doing wrong?
You are doing it correctly, my question is the type of tear away stablizer. There are different thickness of tear away and on fleece, I would use the heavier tear away. Another question is does your needle need changing and is what you are stitching too dense for the fleece? It may be your design that you are stitching having too many stitches in the design and causing the stablizer to tear. You can even double the top water soluble.
Just a thought....
#6
Super Member
Join Date: Jul 2010
Location: Glenmoore, PA
Posts: 7,941
Originally Posted by juneayerza
I know some of you do machine embroidering and I need help with a problem I am having. I thought I would do something simple to start with since this is all new to me. I wanted to make some simple scarves with orchids embroidered on the ends. I hooped tear away stabilizer then used a spray adhesive to secure the fleece and finished the sandwich with water soluble stabilizer on the top per my sewing machine shop owner’s instructions. What happens is the top thread seems to bunch up in one spot and the bottom stabilizer tears and then the top thread gets all tangled around the bobbin and punches a hole in the fabric. Any suggestion to what I am doing wrong?
Thread
Thread Starter
Forum
Replies
Last Post
PumpkinSundae
General Chit-Chat (non-quilting talk)
3
10-13-2019 07:27 AM
ButtercreamCakeArtist
Main
10
09-13-2013 07:51 AM