Need some math help please Problem Solved Thanks!!
#1
Hi everyone. I need some math help if someone can help me. And I appreciate everyones help.
I have made a quilt top that as it is right now without borders measures 80" x 90".
I want to put a 6" border around it.
How much fabric do I need and if possible, how many strips would I need to cut?
The fabric that I am wanting to use, is 44 inches wide.
Thanks so much for your help. :)
I have made a quilt top that as it is right now without borders measures 80" x 90".
I want to put a 6" border around it.
How much fabric do I need and if possible, how many strips would I need to cut?
The fabric that I am wanting to use, is 44 inches wide.
Thanks so much for your help. :)
#2
Super Member
Join Date: Apr 2011
Location: Vermont
Posts: 1,095
You need two that are 80 inches long, then two that are 102 long (90 plus 6 plus 6). That's a total of 364 inches. Assuming you can get a 40 inch length out of each WOF, you need 9.1 cuts. I use 40 when doing this math as it allows for a straight butted seam.(because fabric is usually 42) If you plan on a bias seam in your border (rarely is this done on a wide border) then you need to add about 20 inches per seam to the total. Does that help? As for how much fabric you need, that's 9 cuts of 6.5 inches each, a total of one and five eighths yards.
#3
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Is it important to minimize yardage?
If that's not a problem, what I would do is use a piece of fabric a little more than 2.6 yards long. (2.5 yards = 90". You will need about 93" for the longest borders, and 93/36 = 2.6 yards) . From that I would cut 4 pieces along the length, each piece 6.5" wide. This would make each border a single piece of fabric cut along the lengthwise grain, which is the most stable grain and therefore desirable for borders. Leftovers would consist of a strip of fabric about 12" wide and 2.5 yards long.
I would sew the 90" (longest) borders first. That would make the shorter 80" sides 92.5" long (80+6.25+6.25). With 2.6 yards of fabric, each border would be a single lengthwise piece.
Note: I edited this to correct a few of the numbers.
If that's not a problem, what I would do is use a piece of fabric a little more than 2.6 yards long. (2.5 yards = 90". You will need about 93" for the longest borders, and 93/36 = 2.6 yards) . From that I would cut 4 pieces along the length, each piece 6.5" wide. This would make each border a single piece of fabric cut along the lengthwise grain, which is the most stable grain and therefore desirable for borders. Leftovers would consist of a strip of fabric about 12" wide and 2.5 yards long.
I would sew the 90" (longest) borders first. That would make the shorter 80" sides 92.5" long (80+6.25+6.25). With 2.6 yards of fabric, each border would be a single lengthwise piece.
Note: I edited this to correct a few of the numbers.
#4
Originally Posted by paulswalia
You need two that are 80 inches long, then two that are 102 long (90 plus 6 plus 6). That's a total of 364 inches. Assuming you can get a 40 inch length out of each WOF, you need 9.1 cuts. I use 40 when doing this math as it allows for a straight butted seam.(because fabric is usually 42) If you plan on a bias seam in your border (rarely is this done on a wide border) then you need to add about 20 inches per seam to the total. Does that help?
#5
Originally Posted by Prism99
Is it important to minimize yardage?
If that's not a problem, what I would do is use a piece of fabric a little more than 2.6 yards long. (2.5 yards = 90". You will need about 93" for the longest borders, and 93/36 = 2.6 yards) . From that I would cut 4 pieces along the length, each piece 6.5" wide. This would make each border a single piece of fabric cut along the lengthwise grain, which is the most stable grain and therefore desirable for borders. Leftovers would consist of a strip of fabric about 6" wide and 2.5 yards long.
I would sew the 90" (longest) borders first. That would make the shorter 80" sides 92.5" long (80+6.25+6.25). With 2.6 yards of fabric, each border would be a single lengthwise piece.
If that's not a problem, what I would do is use a piece of fabric a little more than 2.6 yards long. (2.5 yards = 90". You will need about 93" for the longest borders, and 93/36 = 2.6 yards) . From that I would cut 4 pieces along the length, each piece 6.5" wide. This would make each border a single piece of fabric cut along the lengthwise grain, which is the most stable grain and therefore desirable for borders. Leftovers would consist of a strip of fabric about 6" wide and 2.5 yards long.
I would sew the 90" (longest) borders first. That would make the shorter 80" sides 92.5" long (80+6.25+6.25). With 2.6 yards of fabric, each border would be a single lengthwise piece.
Thread
Thread Starter
Forum
Replies
Last Post