Presser foot up or down?
#11
The only time I leave the presser foot down is when I transport my machine.
Think the idea of leaving fabric could be to absorb any access machine oil (if it comes from the repair shop that way).
Think the idea of leaving fabric could be to absorb any access machine oil (if it comes from the repair shop that way).
#13
When you store your machine or finish with it for the day do you leave the presser foot up or do you put it down with a piece of fabric between it and the feed dogs? I always left mine up but I have been told not to because it puts too much stress on the tension springs. Which is it? None of my manuals, from vintage Singer to modern Pfaff and Brother, say anything about the presser foot position during storage or down time.
#14
Junior Member
Join Date: Jul 2012
Location: Las Vegas, Nevada
Posts: 173
If I am transporting the machine then the foot and needle are down with fabric inbetween. Usually tho, not only do I leave the foot up, but I take the foot off too. The reason I do this is because when the machine is turned on the needle defaults to the left side. Usually I have my 1/4 inch piecing foot on the machine which needs the needle to be in the center position. I take the foot off so that I don't accidently break the needle when I start sewing.
#16
When you store your machine or finish with it for the day do you leave the presser foot up or do you put it down with a piece of fabric between it and the feed dogs? I always left mine up but I have been told not to because it puts too much stress on the tension springs. Which is it? None of my manuals, from vintage Singer to modern Pfaff and Brother, say anything about the presser foot position during storage or down time.
#17
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,559
#18
Super Member
Join Date: Jul 2011
Location: Texas
Posts: 1,056
This is a first for me. I've been sewing since I was a young child & no one has ever mentioned it. But, it does make sense to me. I will try to get this old dog to learn something new. Oh, can I remember it though? THAT, is the real question. HEE HEE.
#20
Super Member
Join Date: Apr 2012
Posts: 1,165
On my embroidery machine - if I've been using the embroidery unit and turn the machine off, the machine leaves the foot up. You can't use the lever to put the foot down. Embroidery mode overrides it. If I want to put the foot down, I have to turn the machine back on. If I'm just sewing, the foot goes down.
Thread
Thread Starter
Forum
Replies
Last Post