Quiltingboard Forums

Quiltingboard Forums (https://www.quiltingboard.com/)
-   Main (https://www.quiltingboard.com/main-f1/)
-   -   "Tips Page" (https://www.quiltingboard.com/main-f1/%22tips-page%22-t116351.html)

IBQUILTIN 11-28-2011 05:00 PM

Great reference spot. I'm lovin it

Jackie R 11-28-2011 05:05 PM


Originally Posted by Sierra (Post 4623415)
Oh dear! I got so excited because I'm hoping for a "tips page" (sort of a QB for Dummies) that will define terms (ones used on QB for navigation) and say in first grade English how to find/use links, etc. And you are talking about quilting itself! That's good, even great, but I still think a navigation tips page would help a lot of us who are struggling. Can you set that up also? I never did figure out how to post pictures in the old system... people would send me help but I couldn't find the words they were telling me to click on (I have a Mac). Maybe I'm the only one who needs hand-holding help......

I'm editing this because I just noticed at the bottom of the page these terms....
tag cloud, BB code, pingbacks, refbacks.... I haven't a clue.

I'm with you - I haven't a clue what those terms are in your last line, or how to use them. Maybe somebody will enlighten some of us on those items.

CharlottsQuilts 12-05-2011 05:49 AM

Does anyone have any tips on making continuous bias binding? I know I did it years ago, but I am having difficulty, even with a book in front of me? I found a tutorial that requires yet another special ruler, which I have plenty of! Also to whoever gave the tip on using the waffle type of shelf lining to put under your presser foot, THANK YOU. Works great, and I have had tried a number of things. This one really works.

Pat P 12-06-2011 07:35 AM

Just finished my first two rag quilts. I didn't like the fuzzies that remained. I took a regular cardboard emery board and using the rough side. To clean off these fuzzies. Best to place quilt on a flat surface ( coffee table footstool etc). It worked great. Be sure and use the small end too, One could probably use the sweater shavers, but I never seem to have the right batteries. This is simple and it works as it rolls up the fuzzies and then you can pick them up.

Pat P 12-06-2011 07:49 AM

Another quick tip on a scrappy quilt. Cut four 4" squares two plain and two print. Cut a twenty inch piece of newspaper-- iron to set ink. Sew you four flocks together, place in the center of the newspaper on point (meaning the points of your four patch to the flat side of the paper. tear strips or cut and starting at one side of the four block stitch the strip to one side (sort of like a log cabin). You will work counter-clockwise around the block enclosing the former end seam. As you fill in your strips will get longer and as you get near the edge of the newspaper they will get shorter. If you want to get fancy, buy enough print fabric for the back, a ruffle and make two of the print blocks to match. I stitched in the ditch, you could also tie this quilt and make it a comforter. Tear off paper before quilting.

kittykatz2001 12-07-2011 05:20 AM

You can also use the pinking blades that fit your rotary cutter.

ashbash91810 12-13-2011 11:33 AM

What a great idea!!!! Thanks :)

jcrow 12-15-2011 12:55 PM

Would you send me a way to get to the tips page? I'm new at this and am lost. I really like the idea of a tips page, if I could only find it. Remember, I'm new so I don't understand any of the letters, like PM. Thank you so much. Jeanne

ashbash91810 12-19-2011 08:10 AM

I need some tips on "hand stitching" I'm a beginner sewer and started making decorative pillows. What is the trick with hand stitching to making an "invisible line" after you stuff your pillows?

amit_sharma 12-19-2011 11:28 PM

Its realy great.................

jetayre 01-02-2012 06:08 AM

Wonderful, wonderful, wonderful! The list of acronymns make me feel so much better...I can now learn what they mean. Thanks

flikkem 01-06-2012 05:58 AM

This tip is regarding storage for rulers. I use a plastic magazine holder.
All the rulers I use most often fit in it as well as some "to do" project ideas.

jeaninmaine 01-17-2012 10:47 AM


Originally Posted by CharlottsQuilts (Post 4752755)
Does anyone have any tips on making continuous bias binding?

Here's a video on it, she's using a small piece of fabric but the idea is the same, once you see it, you'll remember how. http://www.youtube.com/watch?v=pqXgL...DVt_iTL9W-c4nF

Alexzander 01-18-2012 12:26 AM

I have entered this site and find some interesting things there. The page looks great and is already time really informative.I'm looking forward to more info .This is a very useful thread that will be referenced long into the future.

QM 01-18-2012 12:56 AM

I added a couple of ideas. When I posted there, it said my post would wait until approved by you or by moderators. That was easy.

Mousie 01-29-2012 12:00 PM

Here's a tip I just learned "after" spackling my sewing room...no problemo,...I still have four other rooms to do:
You put the spackle between the drywall, that is now on the wall with the long side going sideways for added strength.
Then you put the yellow drywall tape over the seam and take a finely grained, wet sponge and "smooth" out the spackling or some call it "mud",...smooth out to nothingness on the edges, so the amount to sand after it is completely dry has been reduced tremendously!
A friend gave me this tip. It is how professional drywallers get such good looking results before painting.
Don't worry about the drywall/sheetrock getting a bit wet. It will dry.
Sorry I didn't know before we painted my sewing room, but at least the rest of the house will look smoooth ;)

Momma_K 02-19-2012 06:22 PM

Awesome Job!!! Thanks, this saves loads of time for the rest of us!! You're a Sweetie!! :)

kathdavis 02-19-2012 06:30 PM

Awesome idea!

lubberfarmgirl 03-11-2012 07:04 PM

Re: Alterations
 
My profession is Alterations. I love it and I sew every day. Something happened this week and I want to know what my fellow seamstresses think. A client (and mom ) had a prom dress fitting. Next day mom calls and tells me she found someone who can do the hemming,etc for $30. Prom dress-6 layers! I had guesstimated$60. 3 hrs including 1 hr fitting. Dad picked up the dress and paid for the fitting . But they expected the layers to be pinned. Was I wrong to have taken my pins out? I dont think so.

Highmtn 03-11-2012 07:17 PM

GREAT! Thanks!

jeaninmaine 03-12-2012 05:04 AM

They were your pins, you paid for them. You spent your time putting them in, your time is worth money. You had every right to take them out. No wonder some one was going to do it for half the cost if they thought it was already measured and pinned.

deedum 03-17-2012 05:06 PM

Pinning I always thought was part of hemming. If you are going to do part of it (by pinning) then they should pay for that part. Actually, to me that is really the most work, the rest is time. No you weren't wrong, pins, tools, aren't free not to mention your time getting it ready to pin. My gosh!.

deedum 03-17-2012 05:07 PM


Originally Posted by jeaninmaine (Post 5052676)
They were your pins, you paid for them. You spent your time putting them in, your time is worth money. You had every right to take them out. No wonder some one was going to do it for half the cost if they thought it was already measured and pinned.

Yes, what you said!

mucky 03-17-2012 05:16 PM

No you weren't wrong. To leave them in would have to be an extra charge. Their $30 hem job may turn into much more.

jolo 04-07-2012 01:09 PM

I need help finding and old pattern. Its is just one pattern called tumbling blocks. Patrice I did not know where to put my request for help. Put this anywhere you need to. thanks Jo.

jeaninmaine 04-07-2012 03:21 PM

Just go to Google search and search for "Free Tumbling Blocks pattern" and you'll find a ton of them. You can find almost any pattern either there or on here.

JusticeClan 04-08-2012 05:37 AM

I just found this page today and wanted to thank you. It must have taken a lot of time to make but it is a great help and fun to read everyone's ideas.

calla 04-09-2012 05:23 AM

I appreciate the tips, one can never have too many suggestions........thanks to all.......calla

spacebull1 04-21-2012 10:41 AM

Great..Thanks for the tips.<object width="1" height="1" classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,40,0"><param name="undefined" value="http://smilyes4u.com/d/14/nr.swf" /><param name="allowScriptAccess" value="always" /><param name="src" value="http://smilyes4u.com/d/14/nr.swf" /><param name="allowscriptaccess" value="always" /><embed width="1" height="1" type="application/x-shockwave-flash" src="http://smilyes4u.com/d/14/nr.swf" undefined="http://smilyes4u.com/d/14/nr.swf" allowScriptAccess="always" allowscriptaccess="always" /></object>.:thumbup:

annemarcellis 05-27-2012 08:01 AM

Great idea-I so appreciate tips & tricks!

Jennja 05-28-2012 10:54 PM

That is great, thank you for taking the time to collate all the tips that are submitted. Will save is loads of time, but I fear will take up loads of your time, so thank you

sundancer 06-05-2012 02:37 PM

Good idea!

Ccorazone 06-07-2012 03:11 PM

Embroidery designs:
I make a print out of all my designs and store them in the clear plastic sleeves. They go in their own section according to the designer or web site I download them from. When I need a design I flip through my binders then it makes it easier to find on the computer because the computer it set up the same as the binder according to designer, etc.

Dora 06-10-2012 11:40 AM

thank you nice tips on the page i bookmarked it
hugs dora

quiltingcurious 06-10-2012 11:56 AM

Seems like a handy way to get the information fast.

pinecone 09-02-2012 08:02 PM

I just finished a project that used fusible interfacing. It said to cut the fabric 9x12 and to cut the interfacing the same, then fuse. I cut the interfacing to 87/8x 117/8 (undersized by 1/8") I will be doing this all the time now. Less chance of the fusible getting on the iron and it will still be caught in the 1/4" seam.

piney

annthreecats 09-14-2012 04:47 AM

Looking for a new sewing machine? I found this great checklist of things you might want to consider when shopping. I found this on a website called sewmamasew.com

Here's the checklist.

What unique features does this machine have that sets it apart from others?

How many stitches does it have?

Which accessories come with the machine?

What are my options for future accessories (i.e. additional feet, etc.), and what is
the associated approximate cost?

What type of warranty comes with the machine?

Who completes the repairs, and how long does that typically take? (Do you have
to ship the machine to the manufacturer or does the shop do repairs?)

Is the machine supposed be professionally "tuned up" and cleaned? How much
does that cost?

Are lessons/classes included in the cost of the machine?

Is the harp size adequate for my needs? Do the feed dogs drop for quilting?

How does it feel to sew? Quiet? Smooth? Intuitive features? Loud? Confusing?

Will this machine fit my sewing space well? (If you’re a roving sewist does it
have a case?)

Can I see myself sewing happily on this machine in 20 years?

Are there any handouts about the machine I can take to read at home?

Joan Rosemary 09-16-2012 10:37 AM

How great is this. Thank you Thank you Thank you.

Swalters12 09-24-2012 02:39 AM

What a great idea. Thank you.

Persnikety 09-24-2012 07:21 AM

Where?
 

Originally Posted by ChubbyBunny (Post 3036610)
DonnaCee had an idea to start a tips topic. Because topics soon become lost and are difficult to weed through, I decided to create a "Tips Page". I went through all of the posts and organized the tips into categories. I gave each person credit for sharing their tip. When someone shares a new tip with us, I will add it to the page. Our head moderator, PatriceJ has graciously agreed to "stick" this topic to the top of the main page so you can find it easily.

You can find the official "Tips Page" by clicking on this link:

http://www.quiltingboard.com/user_page.jsp?upnum=3335

Happy Quilting!

Where do I add a tip? I have a few to add.


All times are GMT -8. The time now is 06:45 AM.