Quiltingboard Forums

Quiltingboard Forums (https://www.quiltingboard.com/)
-   Main (https://www.quiltingboard.com/main-f1/)
-   -   Can you help me find this pattern? (https://www.quiltingboard.com/main-f1/can-you-help-me-find-pattern-t220858.html)

AngelinaMaria 05-06-2013 08:30 AM

Can you help me find this pattern?
 
http://pinterest.com/pin/154107618471591248/

I stumbled across this quilt image (the multi colored pinwheel) and can't find the pattern. I have followed the links and they don't lead to the quilt pattern. It looks like maybe it was for sale at one time but maybe not anymore. Does this look familiar to anyone?

I am intrigued </SPAN></SPAN>by how this would be pieced.

valleyquiltermo 05-06-2013 08:40 AM

looks to me like if your pinwheel is say a 5" finished block, then you would need a 2 piece strip block that finished at 5" next to it and also below the pinwheel, and a 5" block next to that strip block. This makes the section a 4 block section.
Clear as mud right?? Maybe someone with a visual can help you. I can't draw it on my computer but I can see it in my minds eye.

DebraK 05-06-2013 08:41 AM

heres a place to buy it
http://www.latebloomerquilts.com/ite...ter_(pdf).aspx

AngelinaMaria 05-06-2013 08:44 AM

So you think those large rectangles are not a continuous piece of fabric but actually 3 pieces?

DebraK, wow, how did you do that? I am always impressed with internet sleuths skills.

mike'sgirl 05-06-2013 08:46 AM

Looks like a variation of a 9 patch. The 4 corners are pinwheels, the middle is a solid block, the middle top, sides, and bottom are pieced strip blocks. As long as all 9 pieces are the same size it would turn out right. Pretty quilt.

grammy Dwynn 05-06-2013 08:47 AM

you gals are good...

DebraK 05-06-2013 08:51 AM

I googled the image

charsuewilson 05-06-2013 08:57 AM

Have you looked through all the patterns at http://patternspot.com/ ? It looks like a place for different designers to sell patterns.

At first thought, I was thinking it was a 9-patch with the pinwheels in the corners. You might be able to piece it like a 9patch, but the longer pieces might be easier done as a bar. But if you piece the longer pieces as a long bar, then the blocks are intertwined. In the photo, the bars don't appear to be pieced, they appear to be a single bar.

I'm stumped, unless the longer bars are pieced.

AngelinaMaria 05-06-2013 09:20 AM

charsuewilson--I agree that the large rectangles definitely look like a continuous piece of fabric and not pieces (you can tell there is no break in the design in some blocks).

BellaBoo 05-06-2013 09:33 AM

This would be a perfect pattern for the Go die cut. All the shapes are available in a die.

yngldy 05-06-2013 09:43 AM

Divide the pinwheels into 1/4's and you can see a fence rail pattern with the darker print as the center rail and two lighter strips on either side. ALSO, the lighter strips have a half square triangle at each end, each done in a different color to make up the pinwheel. As you make the blocks, you need to make sure that the pinwheel part in the corner matches the adjacent block to make up the pinwheel, and that they are turned the right way. On one square, the rail is up and down, the next is sideways. At least that is the way I see it!

Nammie to 7 05-06-2013 09:55 AM

You ladies are a wonderful resource!!

marymm 05-06-2013 10:19 AM

I believe it is a quilt in a day signature pattern from Eleanor Burns, called Pinwheels & rectangles. The only difference is it doesn't include the borders. Use of variety of brights makes it look different!

AngelinaMaria 05-06-2013 10:28 AM

yngldy--I was picking out the details that you have noted. I think you have to keep the pinwheels un-pieced, put everything on a design wall and then start to very, very carefully contruct it as you noted.

Mickey1 05-06-2013 10:44 AM

Thanks for bringing this pattern to my attention! I love it and ordered it a few minutes ago. Now the search for fabric that is as adorable as those in the quilt!

Rosyhf 05-06-2013 11:03 AM

1 Attachment(s)
This is how I see it. The rectangle has to be in three pieces for this to work. I broke the block up for you. Hope it helps.

AngelinaMaria 05-06-2013 11:08 AM

Rosyhf--thanks for the visual. I think that makes the most sense and would certainly be the easiest to piece, but I'm pretty sure this pattern uses the large rectangles as one piece (the fabric design does not look "broken" by seams in any of the large rectangles). I was so intriged by this I ended up purchasing the pattern. Just waiting to get the pdf so I can satisfy my curiosity.

Thanks.

yngldy 05-06-2013 11:49 AM


Originally Posted by AngelinaMaria (Post 6048173)
yngldy--I was picking out the details that you have noted. I think you have to keep the pinwheels un-pieced, put everything on a design wall and then start to very, very carefully contruct it as you noted.

Right. The pinwheels are formed from the half squares that are in the corners of the outer strips. When the "rails" are put together, the corners form the pinwheel.

QM 05-06-2013 11:58 AM

I agree that the quilt is a lovely one. It is also easy to draw up if you don't feel like buying it. I would have assumed that the pinwheels were 4" or 6", from there, it is just counting squares.

krafty14 05-06-2013 02:16 PM

After staring at the picture of this quilt for some time, I begin to wonder if it is a computer rendering - like from EQ7. Everything is perfectly flat. The binding has exactly the same parts showing all around. And you can't see anywhere that the binding could be joined (unless they were able to match the pattern exactly at the joining. Sooooooo. I think that it is made in 4" squares (4" pinwheels, 4" 2 piece blocks, and 4" solid blocks). Anyone else think so? Ann

Guess so!! I didn't read all the posts. :o)

AngelinaMaria 05-06-2013 02:53 PM

I received the pattern and it is constructed keeping the large rectangle as one piece and essentially "sashing" it with half of the pinwheel blocks. There is absolutely no directions at all as to how to keep your pinwheels all the same fabric so I can only think that the entire quilt would have to be put on a design wall before any pieces are sewn together.

Rosyhf 05-06-2013 04:13 PM

Well at least you have satisfied your curiosity lol. If I were to make tho, I would do it the way I broke it up, much easier.

Mickey1 05-06-2013 04:24 PM

Rosyhf, even though I ordered the pattern, I think I'll be following your suggestion.

Suze9395 05-06-2013 05:06 PM

It's a rail fence pattern.
The large rectangle is the center rail and is a solid single piece of fabric. The 2 outer rails are pieced--a smaller rectangle with a half square triangle square sewn to either end. The three rails would then be sewn together. The blocks would be set horizontal-vertical-horizontal etc. The outer blocks would require partial blocks to finish them, to make the pinwheels whole.

twinkie 05-07-2013 03:43 AM

You ladies are such a wonder when it comes to helping someone.

quilter68 05-07-2013 05:10 AM

The fabrics in this quilt are happy colors. I really like it. I don't know the pattern but any pattern with these colors will be good.

catmcclure 05-07-2013 05:43 AM


Originally Posted by valleyquiltermo (Post 6047970)
looks to me like if your pinwheel is say a 5" finished block, then you would need a 2 piece strip block that finished at 5" next to it and also below the pinwheel, and a 5" block next to that strip block. This makes the section a 4 block section.
Clear as mud right?? Maybe someone with a visual can help you. I can't draw it on my computer but I can see it in my minds eye.

That's only the outer border, which is partial blocks. Main blocks look to be 4"x8" rectangle bordered on two sides with 2"HST, 4" strip of white, 2"HST, making an 8x8 block. Blocks twist and turn across quilt.

Wanabee Quiltin 05-07-2013 05:54 AM

I don't think this would be difficult to piece. Looks like 5" charm squares sewed into the pinwheels and then cutting 2 charms into 2.5 x 5 inches and then a piece that fits in, maybe 9 inches ? Hope you find the pattern.

MartiMorga 05-07-2013 06:02 AM

How about breaking it up as 3 vertical rows? Then you could keep the center one continuous piece. I think either way it would work and look good. Will look forward to seeing your finished quilt.

AZ Jane 05-07-2013 06:29 AM


Originally Posted by MartiMorga (Post 6049871)
How about breaking it up as 3 vertical rows? Then you could keep the center one continuous piece. I think either way it would work and look good. Will look forward to seeing your finished quilt.

Actually that makes more sense. Pretty pattern!

bonnyh 05-07-2013 07:09 AM

I found a free paper-pieced pattern here www.piecebynumber.com/sisters.htm

debbiemarie 05-07-2013 09:36 AM

below the quilt it said, "pattern is called big sister little sister (from quilting board member DebraK who found it on a website for sale", don't know anything about it myself.

AngelinaMaria 05-07-2013 12:42 PM

It is precisely as catmcclure has deducted. So each block has one blade of a pinwheel at the top left, top right, bottom left and bottom right. If you want your large rectangle fabrics to be well distributed in your quilt and if you want the blades of each pinwheel to match (as in the pattern photo) you must set it all out on a design wall and are then dealing with a really fussy assembly process to make sure you sew each piece in the proper place (and the blades going the proper directions) to acheive this.

JanieH 05-07-2013 01:25 PM

I really like this pattern and in the colors shown it looks so bright and summery.

Thanks DebraK for finding the pattern source!

honeybea 05-07-2013 03:38 PM

I found the pattern on www.piece by number. Called big sister little sister

cassie69emt 05-07-2013 04:21 PM

Karen Utley • 11 hours ago
pattern is called big sister little sister (from quilting board member DebraK who found it on a website for sale)

Clueless Quilter 05-07-2013 05:49 PM


Originally Posted by DebraK (Post 6047997)
I googled the image

DebraK,

I would love to know how to 'Google' the image. If you would share that I would really appreciate it.

Thanks, Brenda

blueheavenfla 05-07-2013 06:57 PM


Originally Posted by AngelinaMaria (Post 6047951)
http://pinterest.com/pin/154107618471591248/

I stumbled across this quilt image (the multi colored pinwheel) and can't find the pattern. I have followed the links and they don't lead to the quilt pattern. It looks like maybe it was for sale at one time but maybe not anymore. Does this look familiar to anyone?

I am intrigued </SPAN></SPAN>by how this would be pieced.

I actually made this quilt for my DGD. I saw a photo and drafted it myself to my size needs. It is an Eleanor Burns pattern, if I am correct...at least the one I used to draft mine was. Look at her books. If I am able to find the original photo tomorrow, I will let you know more. Good Luck. It is an easy quilt and turns out beautifully.
Donna

Jannie 05-07-2013 07:23 PM


Originally Posted by Rosyhf (Post 6048234)
This is how I see it. The rectangle has to be in three pieces for this to work. I broke the block up for you. Hope it helps.

To break the pattern down in this matter, takes a lot of guessing out of the pattern. I like the quilt and will have to put it on my to do list.

GeeGee 05-07-2013 09:41 PM


Originally Posted by AngelinaMaria (Post 6048655)
I received the pattern and it is constructed keeping the large rectangle as one piece and essentially "sashing" it with half of the pinwheel blocks. There is absolutely no directions at all as to how to keep your pinwheels all the same fabric so I can only think that the entire quilt would have to be put on a design wall before any pieces are sewn together.

No need to lay out the entire quilt. Did you notice that all the block half square triangles were made exactly the same with the corners being green, gold, pink, green in the same position in each block so when you turn the blocks the colors will match up. Easy peasy!

The color layout did vary row by row but all blocks in each row were the same.



All times are GMT -8. The time now is 10:19 AM.