Cut resistant gloves
Does anyone use cut-resistant gloves other than Fons & Porter Klutz gloves? They are a little pricier than some others I see on Amazon for food preparation. I don’t know how flexible the gloves are. Although I guess the cost of the Klutz gloves is considerably less expensive than a trip to the ER.
|
I picked up a pair of the food prep ones to try. They didn't have the grippy dots to help you hold the fabric like the klutz ones have. The klutz gloves are a lot better.
|
I would like to know how klutz gloves fit. I can only find medium and large sizes and feel I probably need a small size. Having just cut a nasty cut on my index finger I would like to try them. I you use them can you tell me how they fit ad are they cumbersome to use. TIA Sharon
|
I got a F & P Klutz glove at Tues Morning about 2 yrs ago--but hear that other people use the safety gloves from Harbor Freight.
|
I will be following this thread with interest. I’m in the UK a Klutz glove is expensive here - about £25. ($32)
I would be interested to hear what other UK members use. |
I guess a trip to Harbor Freight is in order then to try their pair on, if possible. My concern would be how flexible they are. Not sure why not having the gripper dots would be a major issue since I would be holding on to the ruler with the gloved hand.
|
Originally Posted by grammasharon
(Post 8189778)
I would like to know how klutz gloves fit. I can only find medium and large sizes and feel I probably need a small size. Having just cut a nasty cut on my index finger I would like to try them. I you use them can you tell me how they fit ad are they cumbersome to use. TIA Sharon
The glove would be too cumbersome for any activity other than cutting, so sometimes there’s a lot of putting in on and taking it off (and hunting for it under fabrics on the cutting table). But it’s a habit now and doesn’t seem like a big deal to slip it on and off. The gripper dots work well, and I’ve had it for several years and it hasn’t fallen apart. In short, the only reservation I have about the thing is its high price. It’s expensive, and it’s only for glove. The reason I caved in and bought it was because when I went to Harbor Freight and asked where the cut-resistant gloves were, the salesperson acted l’d asked for a polka dot unicorn, saying they didn’t have any and not seeming to know what they were, then directing me to where they had some work gloves, which I’d already seen and none of which were cut-resistant. I wasn’t sure I could find any sized for women anyway, and men’s gloves are way too big on me, so I just ordered the glove online. The glove hasn’t really been put to the test yet, because I haven’t (yet?) run over my fingers with the cutter. I might like it less if I end up running around without my fingertips. Of course, it’s only cut-resistant, not cut-proof, so I don’t count on it to protect me completely and still give my cutter the caution and respect it deserves and think of the glove as more of a back-up plan for the day when I slip up. |
I ordered the restaurant gloves yesterday from Walmart. I figure that I'll get used to wearing them after a while. Using them will be much better than whacking off a finger! When they get here, I'll let y'all know how they do. I don't think the little gripper dots are necessary because my fingers don't have them and I've been cutting fabric for many years w/o dots.
Thank you, ladies who told us about your experiences of accidents you suffered. You saved many of us from the same fate. God bless you! |
I love my Klutz glove and this is my second one. I wore thru the finger tips on the first one, but it lasted over 10 years, so worth the price. I think the rubber dots are important..they keep the ruler you are using from slipping around. Good luck in finding one. I usually look at Tuesday morning, on-line for sales and free shipping, etc. I think when I purchased my second one, I used a coupon from LQS.
|
I bought some from Amazon. They were for butchers. I bought the XX Small and they fit fine. No problem with slipping on the ruler. I have the F&P ones and they are nice. Either one or any one, just USE it.
|
Originally Posted by Moira in N.E. England
(Post 8189851)
I will be following this thread with interest. I’m in the UK a Klutz glove is expensive here - about £25. ($32)
I would be interested to hear what other UK members use. https://www.amazon.co.uk/NoCry-Cut-R...Butchers+glove I haven’t felt the need to use gloves when rotary cutting but just tested these out and had no problem at all. Just search forbutchers gloves. |
RJ those look like they at least fit well too. the ones on tv quilt shows do not. that would drive me crazy.
|
I just bought the Large size..........4 for $12.99............Price: for med was $1 cheaper. . . from Amazon, butchers glove.....I used the amazon link above and it was in English Pounds, so I just typed in Amazon USA for butchers gloves and found a big selection.
I am getting klutzier as I get older and will try to prevent accidents in the sewing room and kitchen. |
read reviews too. i was thinking about it but changed my mind.
|
Originally Posted by RJLinkletter
(Post 8190233)
Moira I had ones like these recommended on a butchery course I did and so already had them in the house.
https://www.amazon.co.uk/NoCry-Cut-R...Butchers+glove I haven’t felt the need to use gloves when rotary cutting but just tested these out and had no problem at all. Just search forbutchers gloves. Thanks for letting me know. Will be ordering one ASAP!:) |
And now a Public Service Announcement from your friendly lifetime restaurant worker. Cut resistant glives really do work. (They're made of Kevlar, did you know that?) But not if they get a hole, because Murphy's Law *will* make sure that's where the knife goes. Our GM had to go in the office and simmer for a while the day Irma did just that, so she wouldn't scream at her and then fire her. Never seen her that mad. Also, we do a glove sandwich to keep them clean: plastic glove on the inside and outside, cutting glove in the middle. And it goes on the hand that is *not* holding the cutter. Yeah, who in the world could screw that up? Well, Colin was the most recent one...
So there's my report from "the rest of the world." |
Amazon has them for $16.40-16.60. it is worth the money. you would spend that much on a small cone of thread
|
It makes no sense to me to use a very sharp dangerous tool and not use a safety device to prevent the most obvious of accident that could happen and does happen often to many careful users. If you don't like the glove then use Quilter's Slidlock. No hassle and no suction.
|
I don’t use gloves but that may change if I get so that I stat having problems with cutting.
|
Believe me, a rotary cutter is very dangerous. I had twice cut the index finger on my left hand, and my son pitched a fit. He told me that regardless of the cost, I needed to order the safety gloves. I think mine were purchased off of Amazon (my son ordered them for me), providing a glove for both hands, at a cost including shipping of $18. They do work -- and I'm happy to say I haven't had any more cuts from the rotary cutter. Those cuts I had were pretty bad cuts which required butterfly closures to close the cut. It isn't worth taking a chance -- by all means get some ASAP!
|
I don’t use gloves but that may change if I get so that I stat having problems with cutting. |
I too had a very nasty cut with a rotary cutter and still have nerve damage two years later. I bought these ones from Lee Valley tools and also bought some for a couple of friends who quilt. I was quite shaken to try cutting again but after running my rotary cutter over these a number of times in all directions, I am back to cutting comfortably. These ones have grippy dots and fit very well.
(US link) http://www.leevalley.com/en/wood/pag...=1,42207,45887 (Canadian link) http://www.leevalley.com/en/wood/page.aspx?p=72972&cat=1,42207,45887 |
Originally Posted by SillySusan
(Post 8190010)
I ordered the restaurant gloves yesterday from Walmart. I figure that I'll get used to wearing them after a while. Using them will be much better than whacking off a finger! When they get here, I'll let y'all know how they do. I don't think the little gripper dots are necessary because my fingers don't have them and I've been cutting fabric for many years w/o dots.
|
I use the No Cry brand. Fits like a....well, like a glove. :)
|
Originally Posted by zozee
(Post 8191776)
I use the No Cry brand. Fits like a....well, like a glove. :)
|
Whatever you choose, everyone needs a cutting glove! I cringe when I watch the quilting shows and see how they zip through cutting without a glove, often in distorted positions so they don't have to rearrange the fabric and template. I don't think any glove is 100% cut-proof, but if nothing else, the act of taking a moment to put on a glove before cutting is a reminder to slow down and pay attention to what you're doing. I use Fons and Porters -- and yes, be sure to get the size that fits you best.
|
I posted a unique solution to this back in 2016. My son was a Coast Guard Officer. For their drug searches and the like, they wore CG issued gloves that could not be cut by sharp implements and/or weapons. When he left for civilian life, he offered me his gloves. My post indicated the brand but I am in the process of moving and can't remember. When I searched for the post which included the information, it indicated that the page was not found.
Bottom line, they are needless to say and I feel totally protected in them. They are very easy to work with them on and comfortable. Whatever you decide, the gloves!! |
mhollifiel - here is one of your old posts with the information.
Originally Posted by mhollifiel
(Post 7427200)
Last weekend I cut a thick bacon slice off my left forefinger while rotary cutting. Fortunately my DIL is a physician and I live with them so I was in good hands. Still it took three days for the bleeding to stop when changing the dressing since it was so deep. YES, it HURTS!
Here's the really, really dumb admission I have to make. My son was in the Coast Guard until this summer and he gave me his Kevlar lined gloves to keep my hands safe while cutting fabric. The label says that they are Hatch SGK100 gloves and, now that I finally got around to googling them, they are used both in the military and law enforcement. Apparently they are capable of handling even the blades of knives in confrontations. LSS, I have been wearing them since and they are very flexible and comfortable. I like them much better than the other ones typically sold to quilters for cutting. Yep, had a set of those in the drawer, too. DUH! These Coast Guard issued gloves have a surface that really grips my rulers. I love my son and I'll be wearing his gift for cutting from now on. Note to anyone out there with cutting gloves in the drawer: They work much better if you WEAR them! Please spare yourself some agony and learn from my mistake. |
Thanks for everyone who posted. I got a pair this weekend. I don't want to end up in the ER from cutting fabric!!!
|
I still haven't learned to wear the gloves I bought a pair of the Klutz gloves after I cut my finger to the bone and a trip to the er and 11 external stitches. I could not get use to the feel of the gloves on my hands. This is another reason for going to the Accuquilt GO!. Mind you that was about 25+ years ago I bought them when they first came out and I only tried the gloves for a short time and couldn't get use to them. They're still around here somewhere.
|
Bought the klutz glove from amazon. Good price. Fits perfectly
|
After buying the High quality Hessler very high quality and sharp knives, the safety of my fingers was the biggest concern. So i decided to buyNoCry gloves. They looks good and save you from accidentally cutting yourself.
|
I looked up no cut gloves there were more than a dozen of them on amazon. Which one should I get?
|
Any of them would work I think. I bought mine on Amazon and they're great. Can't think of the brand. Check reviews and see what people say about them.
|
Originally Posted by seazteddy
(Post 8439759)
I looked up no cut gloves there were more than a dozen of them on amazon. Which one should I get?
|
I got mine at the sporting good shop. They were made to clean fish and they are wonderful. They feel like a pair of thin gloves and will save you from getting a bad cut. I haven't seen any with dots on them. I have a pair of quilting gloves that have dots, but you could cut through them.
|
All times are GMT -8. The time now is 10:44 PM. |