![]() |
I use Elmer's on things like applique and binding. I've seen a video of Sharon Schamber using it with piecing too. She used it to glue the places where pieced sections go together so that they stay perfectly aligned when sewing, said she doesn't use pins. I haven't gone that far but if I ever do something that might need it I'll give it a try.
Using it for binding is fabulous!! No pins, no wrinkling, none of that twisting look. Hand sewing binding on the back without hassling with pins is even better. |
Roxanne's glue baste it is amazing!
|
the glue with the long nozzle is Roxanne's glue. Can be used like elmer's school glue but it seems to hold better and set up quicker and yet easy to wash out of fabric after sewn.
|
Good ole Elmers School Glue. Good tack and washes out.
|
I use Elmer's glue and you can buy the nozzle bottles quite easily. I think the one you buy in the nozzle bottle is called Aleen's but can't recommend it as I've never used it.
|
For something temp I use school glue sticks.
MK |
Thanks for the information on using glue. I have been looking for the thin nozzles. I'll try Michael's as I am not having any luck finding them on the internet. Nancy's Notions no longer has them listed. I found the picture on the Folkart web site but couldn't figure out how to order them. I am so glad the question about glue was asked. Now, maybe, I'll finally get those nozzels.
|
Originally Posted by franc36
(Post 4656669)
Thanks for the information on using glue. I have been looking for the thin nozzles. I'll try Michael's as I am not having any luck finding them on the internet. Nancy's Notions no longer has them listed. I found the picture on the Folkart web site but couldn't figure out how to order them. I am so glad the question about glue was asked. Now, maybe, I'll finally get those nozzels.
|
I just use the school glue. Look for the nozzle at Michaels or Joanne's.
|
Originally Posted by COYOTEMAGIC
(Post 4654379)
Hey Kerry! Some of us use glue for holding the binding in place until it can be sewn. Some use glue instead of pins or other means of basting. I use glue sticks for my applique work instead of heat bond/wonder under. It doesn't leave the quilt stiff and you can move it around for a while until you get your pieces just right. I use your basic Elmers school glue. It washes out the first time with no problems. Doesn't stain your fabric.
Hope that answers your question |
I think the product you are looking for is Roxanne's Glue Baste it. I found it when taking an applique class at quilt camp, many years ago. Expensive, nozzle stopped up, made me crazy. Think it may have been improved since then.
|
I use Elmerd and set with iron. Great! No pins! I make my own tips cheap ! Easy!
|
I use elmers glue also for my applique. I put a small amount and iron, and it stays there until I get it sewed down. I sometimes do quite a few pieces before sewing and it makes it a lot easier.
|
Me too. Love this method.
|
I believe that is Roxanne's glue. The long thin nozzle is good for applying, but mine got plugged up. A friend said you could use watered down Elmer's glue with the same results. I did try it, but found the Roxanne's to be a little easier to apply. I use a glue stick the most. Either the one from Fons and Porter or the Sewline one. They are both refillable.
|
What about needles? do they collect "stuff" and you have to change them more often?
|
I have been using the Elmer's glue sticks or Rose Arts glue sticks instead of tacking or pinning----put it on and rub down flat and good and then iron--doesn't move anywhere when hand quilting--make sure you get glue on all edges too
|
Originally Posted by JeanieG
(Post 4648037)
Yes, Elmer's School Glue works great. Check out Sharon Schambers site. She uses this glue to hold her bindings in place instead of pins before sewing. You use a fine line of glue, set the binding on as if to pin it and press with a hot iron, then you sew it on. The glue washes out when you wash it. I have been using this method for over a year now, it works great!!!
|
When I have to sew with bias edges I use glue to stabilize the edges. If I have to cut a block on the diagonal twice, I usually take a washable glue and spread it on the line I'm going to be cutting. After it dries I press and then cut the block. The glue keeps the bias edge from stretching. Really works wonderfully
|
Yes the Elmers glue sticks work great.
|
| All times are GMT -8. The time now is 09:50 AM. |