Is it true that the rotary blades from Harbor Freight are ok to use just ar good as the ownes you get at Joannes? I am going there Wednesday and thought I would pick some up. Thanks for in info. Jean
|
I ordered a bunch of them--no problems at all.
|
Be sure to ask for carpet cuter blade. They are great!!!
|
They don't work well for me. I must have a bad batch. They've all gone dull or skippy after just a few cuts (or in one case, no cuts at all).
|
Originally Posted by jean knapp
Is it true that the rotary blades from Harbor Freight are ok to use just ar good as the ownes you get at Joannes? I am going there Wednesday and thought I would pick some up. Thanks for in info. Jean
|
sorry...slow computer, twitchy finger!! LOL
|
They work fine except once in a while there will be a bad one in the package. For the price, I can't complain.
|
so far, I have had good luck with these blades...they may dull a tiny bit faster, but not by much.
|
I've been using them for quitea while. I think they are well worth the price ...2 in a pack for 2 dollars. sometimes they are on ale for 1.49. I feel they are sharper and last longer and when they start to skip I do not think twice about poppin another in, whereas with the brand name expensive one . I will struggle until I am close to tearing my hair out. we all like to save $$.
|
Hummmmm are they just called "rotary blades" in the catalog... my DH has that book around here all the time.. will have to check it out!! They just opened one somewhere around here, so maybe i'll take the ride with him someday!!!
|
I have had no problems with them in my rotary cutters. No skipping or anything. Sometimes that happens if there are two blades in by accident.
|
Originally Posted by great aunt jacqui
I've been using them for quitea while. I think they are well worth the price ...2 in a pack for 2 dollars. sometimes they are on ale for 1.49. I feel they are sharper and last longer and when they start to skip I do not think twice about poppin another in, whereas with the brand name expensive one . I will struggle until I am close to tearing my hair out. we all like to save $$.
|
Maybe if harbor freight was local for me I'd be more willing to keep trying but it's an hour away and not anywhere near any shops that I usually go to.
|
They're very good, or the ones I've had have been.
My daughter asked if there was anything I wanted I couldn't get around here, and I told her Harbor Freight blades. They came today, 10 packages of 2 each!!! Love them!! And I have the best kids, they actually listen to me! |
One pack I got looked like it had been opened and taped shut. But it still cut quite a few pieces before giving me grief.
|
One pack I got looked like it had been opened and taped shut. But it still cut quite a few pieces before giving me grief.
|
I haven't had any problems, seem to be just as sharp and last as long as the "name brand" blades.
|
Originally Posted by GrammaBabs
Hummmmm are they just called "rotary blades" in the catalog... my DH has that book around here all the time.. will have to check it out!! They just opened one somewhere around here, so maybe i'll take the ride with him someday!!!
|
I haven't tried them yet. Having a friend come visit and that is one of our stops while she is here to stock up.
|
I have ordered them and love them. I have had no problems.
|
I just picked up two packages to try, but haven't used them yet. I'll buy more if these turn out to be good.
|
they are "carpet cutter blades".
|
I love the ones I bought. No problems at all!
|
I got a bunch and they are just fine - only cheaper than Jo anns.
|
Originally Posted by jean knapp
Is it true that the rotary blades from Harbor Freight are ok to use just ar good as the ownes you get at Joannes? I am going there Wednesday and thought I would pick some up. Thanks for in info. Jean
|
I just finished cutting 35 12" blocks - started last October, finished most of the cutting this morning! Am still using the same blade from Harbor Freight! Beat that one! Edie
|
what is the best brand
|
what is the best brand
|
I found these cutting wheel at Harbor freight and they are carpet cutters, ill be getting these now. The local LQS sells one... just one blade for $ 8.59 each......ahhhh not here
|
Originally Posted by kai's Tutu
what is the best brand
Ask for carpet cutter blades - It is a black, red and yellow package with plastic over the top and on the back it says Distributed Exclusively by Harbor Freight Tools. I hope this helps you - load up lady!!!!! Edie |
I like the Harbor Freight blades. I found they don't dull as fast as the Olfa ones.
|
Jean,
they are and might also be better than the commerical ones you buy at Joannes. When you go to harbor frieght ask for carpet cutter blades. Here in WA state they are 2 blades for 1.79. I just bought 10 packs and the guy at the counter said you must be a quilter.............LOL Robert |
i just got 15 packs for 1.59/2pk. 6 packs were for my sister. i was nice tho and didn't get all 20 pks that they had. i left 5 for otheres. lol
|
I wrote the original complaint about them. I don't know what happened but I am having fantastic results now with the same blade and cutter. I never changed the blade. I wonder if the angle might be a little different and I had to adjust the way I cut? It's still sharp and never misses. Maybe I had to press a little harder. I don't know. Sooo, if like me, you were having trouble forge through and keep trying. LOL
|
Because they were cheap I guess lol. I used the same blade for fabric and feed sacks and still they don't skip as bad as the expensive ones I got from Joann's I have had this blade in there since the day I bought the first package and its still going, thru paper feed sacks fabric all the same. Its starting to skip now after months, but the expensive ones I have had experience with since starting to quilt 12 yrs ago, would come out of package duller than the HF blades so yes they are worth it.
|
I've been using mine for a long time now.. perhaps a year, and have had no problems.. I ordered a bunch and have given quite a few to my quilting friends.. they are great blades for the low low price! I'll never buy another rotary cutting blade from the quilt shops unless I just have to.
|
I am in a prayer quilt group at chruch and we use them all the time, they are wounderful and the money you save is well worth the trip
|
I've had good luck with them and bad luck. In my opinion it is worth the price even if a few of them have nicks in them.
|
I love them, no problems, they come 2 to a package, make sure you only use one!
|
I love them and haven't had any problems with them. They're always in stock at my HF. Hubby even picks them up when he's in there shopping and I'm not with him. What a guy!
|
All times are GMT -8. The time now is 06:03 PM. |