Quiltingboard Forums
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Quiltingboard Forums (https://www.quiltingboard.com/)
-   Main (https://www.quiltingboard.com/main-f1/)
-   -   Help, my Brother SE 270 is eating my fabric! (https://www.quiltingboard.com/main-f1/help-my-brother-se-270-eating-my-fabric-t160231.html)

dollycaswell 10-13-2011 10:02 PM
Originally Posted by Nanamoms
Have you use the dental floss to clean the upper thread guides? I have the 270D and it has done that a time or 2. Be sure to use the "unwaxed" dental floss.

I just had my PE700II start eating fabric today and I about freaked out. I'm in the middle of a project with a deadline of tomorrow. I cleaned everything really good, did a shutdown on it, removed, clean and replaced the embroidery unit and have had no more problems...keeping fingers X'd!!

Whoa, help me out here, dental floss on the upper thread guides?? Do you mean that part on top that you wind up and down and around and etc before it goes into the needle? I can't even imagine where I would use dental floss in that area.

dollycaswell 10-13-2011 10:04 PM
Originally Posted by Peckish
That machine is self-oiling, don't oil it.

Are you holding your thread tails while you take the first couple of stitches?
Yes, I think you're right about not oiling, so I haven't done that, but no, I don't hold onto the tails. When I do they just seem to keep pulling out behind the machine, sort of like I'm just pulling the bobbin or the top thread and there is nothing stopping it.

dollycaswell 10-13-2011 10:09 PM
Originally Posted by PaperPrincess
I know you said you cleaned out the bunnies, just want to make sure you removed the plate. It sounds like the feed dogs may not be engaging. Make sure that you remove the plate and clean around the feed dogs.
Yes, I actually cleaned it out by removing the plate a couple weeks ago. I must confess, it was the first time I'd ever done it since I owned the machine! You can't imagine how much stuff came out, and it was running great then!! haha I just kept pulling fuzz and threads and lint out and I did get way down in there and it just kept coming out. Amazing that it ran so well for so long. I've probably owned it for 6-7 years and never done it before!! SEND THE SEWING MACHINE POLICE!!! It did teach me quite a lesson though, but I'm serious, it ran much better before I cleaned it out. It's afterwards that I'm having these problems. I'm trying to figure out if I bumped something or ??

Peckish 10-13-2011 10:10 PM
What kind of needle are you using? If you have a ball point needle and you're not sewing knits, it may have a tendency to push the fabric down. Try a new needle, if you haven't already, it may be dull.


All times are GMT -8. The time now is 08:14 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page