|
Invisable thread
I have never used invisible thread. I want to use it for satin stitch applique. Is there anything I should know about it before I start?
|
I like using invisible thread. My machine has no problems with it.
I'd test it on a practice piece first. I have a hard time picturing satin stitch looking good with invisible thread. Satin stitch generally closes a raw edge, and you'd see through the thread, and I feel like it would have a plasticity looking build up. Maybe not though- that's why you should test. |
I use lots of it , but would not use it for satin stitch. That much thread used in a satin stitch ... it would not be so invisible. Think about using a blanket stitch and shorten the "bite", it would be much more "invisible.
|
The invisible thread I have used for machine applique is YLI's nylon monofilament .003. This thread would never be used for satin stitching, though. Usually satin stitching is done with cotton or polyester thread. Although I have a spool of polyester invisible thread, I cannot imagine using it for satin stitching either. The stitching would become very hard.
At the very least, try whatever invisible thread it is that you have on a sample piece first to make sure you will like it. |
If not satin stitch, how would you machine applique to keep edges from fraying?
|
I would use a matching cotton thread for satin stitching--or use interfacing to finish the edges, then use the invisible thread to top stitch the applique.
|
Are you doing fusible applique? People use a variety of edge finishes on fusible. Most do not use satin stitch (even with cotton or polyester threads) because satin stitch creates a really hard edge. Many use either a small zigzag or a blanket-type stitch. The edges are partially exposed but may not fray -- depending on type of fusible used. What fusible are you using?
|
Whenever I use invisible thread, I only use it in the top thread. The bobbin is a good quality cotton thread, and I use a small zig zag stitch. The fusible keeps the edges from fraying. I think a satin stitch would be too stiff and tight and wouldn't look good. Make sure you make a sample to make sure this is the look you want.
Sue |
Many people stitch a straight stitch about 1/8 inside of fused appliqué pieces for raw edge appliqué. This is used frequently in art quilts or wallhangings. I would not recommend a satin stitch with invisible thread. If you want to cover the raw edge with satin stitch, I would recommend you use something like Gutermann Sulky for a pretty satin stitch or similar.
|
I used a satin stitch and you are all right. It left a hard edge. Glad it was a mug rug, I was experimenting, and I won't do it again.
|
| All times are GMT -8. The time now is 01:53 AM. |