Quiltingboard Forums

Quiltingboard Forums (https://www.quiltingboard.com/)
-   Main (https://www.quiltingboard.com/main-f1/)
-   -   Joining batting (https://www.quiltingboard.com/main-f1/joining-batting-t201141.html)

jparsels 09-21-2012 12:46 PM

Joining batting
 
What kind of tape is used to join batting pieces? Will the tape hold or do I need to also sew the pieces together?

PenniF 09-21-2012 12:58 PM

don't know about others - but i always overlap about 3/8" and run a zig-zag stitch over it.

117becca 09-21-2012 01:08 PM

I don't overlap because i don't want a bump - I will butt the edges together and zig zag. I generally don't use heat adhesives....just personal preference and often times i can sew them faster than using the iron.

auntpiggylpn 09-21-2012 01:19 PM

I use a tricot fusible interfacing that I have left over from garment making. Cut a 1" or 1 1/2" strip, butt the edges together and iron it on. Much cheaper than the "Batting Tape". About $3-$4 yard at Joanns.

Prism99 09-21-2012 01:23 PM

The batting tape is fusible nylon tricot. The batting tape is enough assuming you will be quilting over the area. If you are tying a quilt, you may want to reinforce the join with a machine zigzag.

Lisa_wanna_b_quilter 09-21-2012 01:26 PM

You can buy batting tape.

http://www.connectingthreads.com/too...r__D21128.html

It works great. No sewing required. However, it felt to me like it is just lightweight nonwoven fusible interfacing in a strip, so I've started just buying cheap interfacing and cutting my own strips. Very easy. Fairly cheap. I've done several quilts that have been washed many times. So far, all is well.

Lori S 09-21-2012 01:42 PM

I am on the side of just but the two pieces together and zig zag. I have more notions than I can usually find when needed... so one more and my sewing room might just burst.

MattieMae 09-21-2012 01:54 PM

I use fusible interfacing on my Warm & Natural cotton batting, which is just butted together.

katier825 09-21-2012 01:56 PM

I've tried a few ways and what I find easiest is to put the 2 pieces on top of each other, trim a straight edge, pin and sew thru both with a blind hem stitch. Then I open it up and rub my finger along the seam to smooth it out. I found it easier than the zig zag way. Try different methods on some scraps and see which you like best.

Jackie Spencer 09-21-2012 02:19 PM

When I bought my Bernina I took a class to learn all the things my machine would do. One of the things they had us do was butt pieces of batting together and zig zag sew them together, no tape or anything else. No fat seams either!!


All times are GMT -8. The time now is 10:58 AM.