|
In addition to blowing the crud harder into the insides of your machine, compressed air contains moisture (water) that can damage delicate electronics or cause metals to corrode.
|
The stocking idea, I never thought of that, thanks Nessie.......calla
|
I use the compressed air ... but ... only on the top part of the machine and only after blocking the needle plate and bobbin areas so I don't blow anything into that part of the machine. If I knew how to take apart the bottom portion of my machine I might use it there also, but am not willing to do that.
I watch my machine repair person and she used very compressed air to clean out the machines. |
If you take the housing off your machine it's okay to use the canned air. Never blow your breath to remove lint. Your breath contains moisture which is bad for the machine.
|
Ditto what Neesie said. I have used my vacuum with the knee-highs to clean my machine and other things to just catch what I need. Found a foot for my machine also.
|
Originally Posted by Wanabee Quiltin
(Post 6285428)
Okay, this is from an expert sewing machine repairwoman (not me !): do not use compressed air. I just picked up my Bernina after getting it cleaned and serviced and she asked me what I used to clean it with. I said: compressed air. She said that was a no-no, use a vacuum cleaner. She said all we do is push the dirt, lint, oil whatever into piles that does not blow out. So that is what I will do in the future. This woman is a true expert at repairing all machines, she has quite a reputation in our area.
|
I bought a can of air too...then DH told me in no uncertain terms what a bad idea that was...I knew if I used it and something happened I'd have to listen to I told you so for the rest of my life....Can't remember who, but someone on the board suggested the little vacuum attachments at Harbor Freight...They come with step downs to fit most any vacuum cleaner and they work wonders. I think it was only about $8.00. I am so grateful for all the tips I have found here...this right at the top...Amazon has them too cheaper...LOL
http://www.amazon.com/Micro-Vacuum-A...attachment+kit |
I was told by my machine repairman to never use canned air. It forces lint into place on the machine that cannot be removed easily.
|
I like this hint! I vacuumed up a loose foot one time!!
Originally Posted by Neesie
(Post 6285354)
Make sure you fasten a nylon stocking over the nozzle of your vacuum cleaner hose, in case anything is loose!
|
I understood that you should not use those cans on your sewing machine - might blow dust somewhere where it could mess up your machine.
|
| All times are GMT -8. The time now is 06:06 AM. |