New juki tl-18 QVP
 

I got it! I happened to be at the dealers today taking a class when ups showed up with their shipment of Juki’s.

i just sewed a few scraps and it’s doing great! I’ve heard it can go either way with these right out of the box. I was a little unsure about learning to use it, the threading, bobbin, etc. is so different than my brother but aside from some trouble learning to use the threader, it’s going well.

Congratulations, have fun with it!

How exciting...new machines are so much fun! Enjoy your new Juki.

That's great, Pamela. Have fun!!!

New machines sure are fun! I hope you'll love your Juki TL18qvp as much as I do my TL2200qvp :) It's really a fantastic machine that sews a fabulous straight stitch through layers and layers of just about anything! And FMQ is terrific on the Juki because of the great visibility under the harp.

It was my 1st machine, and my favorite still, that I found super easy to operate (except that pesky auto needle threader can be finicky depending on what needles you're using!) I don't typically run it at full speed because it's f.a.s.t.! And mine likes to be oiled regularly.

Not sure what feet came with yours - mine came with tons. The few add'l I've bought are the Echo and Ruler feet for FMQ. I use the seam gauge (screws down onto the bed of your machine) often when piecing to keep consistent seam allowances - can't recall if that came with the machine or if I purchased afterwards but I use it often.

Welcome to the Juki Club :)

Congratulations! Enjoy your new purchase.

Congrats! Always fun to get a new machine!!

How much oil do you typically use at a time?

Pamela, I can answer this I think. I add 2-3 drops for about every 8 hours of sewing. I watched a Leah Day video about this and she was using my machine ( TL2010Q). I would guess that as long as your Juki is like mine, and I believe you said it was, that you won't go wrong with 2-3 drops.
Hope this helps!

Thanks Susie!

When I took my guide class, I asked about how much to use and she said "a couple drops" so that's what I've been using.

Also you should oil the Race when changing bobbins.

The race is in the bobbin area.

It will be quieter and smoother.

This is what I do and works for me and my Juki TL98 QE.

I need to figure out exactly where to put the oil in the bobbin area, the picture in the book isn’t super clear

Congrats. You now own one of the most solid, reliable, easy-to-operate machines on the market today. Oil her and take care of her and she will reward you with years of service. I've had my 2010Q for 3+ years--worked her hard--and never had a moment's trouble. The stitching on these machines is great for piecing and the extension table will help you with FMQ.

I just very recently, like 2 weeks ago, purchased the Juki TL2010Q and am pleasantly surprised with it! It just proves to me once again you really do get what you pay for because I tried last year to get away with buying cheaper machines and that's just exactly what I got! Hate both of them! But I think me and Miss Juki are gonna become friends real quick!!! Still learning about her but from what I've experienced so far - think we're gonna be besties for a long time to come! Ah, with proper maintenance of course! :thumbup:

Congratulations!

My juki sets in the bed with oil so I don’t oil extra. Just make sure wick is down and keep an eye on oil level. Man does it ever sew fast. Best make sure your fingers are not in the way. Big harp space nice table that mine came in. Just waiting to get into my new studio to start using it

I also just purchased the Juki2010Q and I love it. I have seven other machines (mostly Viking Huskvarna) and find the Juki much easier to use and faster. The only complaint I have is that it could use more light Of course it could be my old eyes but I purchased a clip on light and it compensates well. Enjoy yours. I sure am enjoying mine.

My Juki2010 is still my favorite, even with the electronics no longer functioning correctly. Very glad I learned how to disable them so the machine would still work. Though I miss the thread cutter, I think I like it better with pedal control of needle position. It's actually very easy to stop it needle up or down with just the foot pedal, and I really don't miss the occasional extra stitch it would make so it could stop with the needle down every time.

Macy, I can't get my needle threader to work. It's really a pain. I now just thread it the old-fashioned way.
I watched every Youtube video and I had success maybe once or twice!

I’ve been practicing with the needle threader, I have to change my angle and look at it from the side on the last part to get it to work.

Another thing with the needle threader is to make sure it is pressed all the way down, and keep it all the way down as you bring the thread straight forward under the metal piece(don't know what to call it, but it's key to bring the thread under it for getting the thread thru the needle) and then guide the thread to the right. It will naturally want to go in the slit, slot, valley etc.(again don't know what to call it) then slowly release the threader and the thread should go through the needle. Hope this helps. Once you get it you'll wonder what all the fuss was about.:D I don't think the manual emphasized enough about that metal piece directly down from the last thread guide.

So happy for you! You're gonna have years of fun with your new toy.

Pamela, I have bought a used Juki 2200 QVP and feel really dumb that I dont undestand how to use the bobbin winder. The instructions are really skimpy. Also, what thread do you recommend using for quilting on this machine?

Don’t feel dumb! The manual isn’t that easy to follow. Is there a juki dealer near where you live? I’m sure they would show you how to wind a bobbin if you asked. Also might be able to find a YouTube on how to wind a bobbin...

ive been using MSQC and aurifil and so far it’s been working well.

.

Thanks for the thread suggestions. I have just rethreaded with some Aurifil and it isn't sewing very pretty but I will do some more practice. My husband had no trouble at all with the bobbin winder. Sometimes I am a total klutz. HA

Hi,
I work on mechanical machines. 2-3 drops per 8 hours for an average sewist’s machine is alot/too much. Over-oiling a machine can happen.
Stick w 1 drop per oil hole. Oil when your machine starts sounding clanky (dry) as opposed to usage hours since everyone’s machine usage varies.

How are you liking your Juki? I'm thinking of buying one, but wonder about the prior model TL-2200QVP. Any thoughts? Thanks, Barbara, Portland

I’m liking it! I need to figure out the tension on it, but I have faith I will be able to.

Thanks. I will be sure to examine the tension before I purchase. It seems like a great machine. Barb

Question about the Juki TL 18 ruler foot
 

I just bought the Juki TL18QVP. I would like to purchase the ruler foot. I been looking online and see one that says for the TL series, but is this the right one? Could you tell me the parts number of the one you bought.... Thanks






QUOTE=TheMerkleFamily;8160773]New machines sure are fun! I hope you'll love your Juki TL18qvp as much as I do my TL2200qvp :) It's really a fantastic machine that sews a fabulous straight stitch through layers and layers of just about anything! And FMQ is terrific on the Juki because of the great visibility under the harp.

It was my 1st machine, and my favorite still, that I found super easy to operate (except that pesky auto needle threader can be finicky depending on what needles you're using!) I don't typically run it at full speed because it's f.a.s.t.! And mine likes to be oiled regularly.

Not sure what feet came with yours - mine came with tons. The few add'l I've bought are the Echo and Ruler feet for FMQ. I use the seam gauge (screws down onto the bed of your machine) often when piecing to keep consistent seam allowances - can't recall if that came with the machine or if I purchased afterwards but I use it often.

Welcome to the Juki Club :)[/QUOTE]

I just purchased the Juki TL-18QVP yesterday. Only after 5 minutes sitting down test driving the machine at the dealer, discovering all the great features, I had to buy it. I don't usually buy things on a whim - I usually research for weeks, test drive at least twice, ask owners their opinions and then finally pull out the checkbook. Not this time. It was a quick decision. Early today I took it out of the box and set it up, read the manual, watched YouTube videos and became very attached to this machine. Juki once again did a fantastic job listening to the voice of quilters and sewists.

From the Juki website..
" As a reflection of JUKI’s Japanese heritage, the TL-18QVP was named Haruka meaning “beyond.” Go beyond expectation with Haruka!"

Does Juki name all of their machines? I find that so interesting, since many of us name our own machines!

Congrats, Pamela! You will love that machine. You can quilt your quilts on it! And it sews fast which is great for long straight seams like borders and seaming backings. Juki's are usually great right out of the box. There is no dealer near us, but I bought mine from Les Reichert in AZ and have only needed to talk to their tech maybe once over the phone.

To oil the bobbin area, put one drop of oil on the hook.

There are videos online that show you how to set your bobbin tension so you can make good stitches. If you don't keep the bobbin area clean, the machine tension may be affected. Keep the lint out with a good brush or big pipe cleaners between projects, or after several hours of sewing.

Enjoy!

I don't have to tell you to have a load of fun because I know you are already doing just that. Congratulations on you new machine.