Pattern Help
 

Does anyone know the name of this pattern?

Or, the best way to do it?

I was thinking sew over-sized rectangles together with the black strip to make a square and then use your plastic square on an angle to cut them, (some waste), but my husband says it would be better to make square of each fabric, slice it at the exact angle, add the black to one of them and then choose another opposite piece to sew on to make your square.

What do you think?

Watson

[ATTACH=CONFIG]613044[/ATTACH]

Wondering if they used this ruler with a 1 inch sashing between....

https://youtu.be/l7nXyMoSvBk

I made a pattern like this once. I layered [what in this case would be 8] fabrics and cut using a paper pattern. Rearrange the pieces so each stack has 1 of each of the 8 different cuts. Piece together, use maybe a really thin bias tape, or non-bias, strip overlay to create the stained glass look, sash and viola! In my case I did not use the black strips, but used decorative stitches over the seams.

Those are basically Houndstooth or Windmill blocks with the addition of the black sashing between the blades.

When I made my houndstooth quilt I made slightly overlarge two strips of fabric and then skewed my ruler to make the angles. I used a piece of tape on my ruler for the shape I wanted. This would just add the narrow fabric in between, all straight line sewing but you do have to be a tiny bit careful with the slightly bias edges.

Later I found a specialty ruler on clearance that would do basically the same thing but slightly different proportions from my block.

I had planned to make a houndstooth way back in the early 80s, but it took awhile to collect the fabrics and be ready. Just when I was ready M'liss Rae Hawley came out with her first Fat Quarters book, and although I had never seen one in a show, at fair, or anywhere else -- there it was in the book! So I wasn't going to make it because everyone would assume I got the idea from the book. LOL, I was complaining about it to one of my friends at the quilt guild meeting and the lady in front of us was cracking up. Turns out it was M'liss who was the speaker at that meeting. Anyway, she wrote up some nice instructions.

Looks like a Stack and Whack. Use squares stacked up and cut at an angle. If you want them all the same angle, measure in the same on two opposite sides--i.e. 4" from right on the top and 3" from right on bottom. Use 1" black for separation and sew 1/4" to connect two different colors--no loss in size for block. Donna Jordon explains this much better in her Ribbons quilt tutorial on YouTube.

I really like the looks of that quilt but I am so challenged when it comes to making a block with angles. Sure hope that someone on this board finds how to make this pattern with a plastic template and I would certainly purchase it. I will keep looking on this thread to see if someone has an answer.

I don't know the name of the pattern, but I agree with your husband. Do a stack and slash with multiple colors to keep the size/angle the same. Because you will be adding the black sashing you may want to start with a rectangle then when you add the sash they will end up as squares. The ruler tall chick mentioned might help but not a requirement.

Watson ... both ways would work.
Though I think your mind and mine must be the same as I think yours would be the easier for stitching and precise results. Trimming after the black strips are added, using a template would create total precision!

Yes there would be wastage, but I can accept that when it is giving me precision.

To make the trimming job even easier, I'd get the local glass shop to make me a plexi template.

https://youtu.be/QTUv-XTvHas

I made this quilt a long time ago. I took a class . We didn’t use the adhesive bias tape; we made our own. The adhesive tape would be easier, I think. It’s not exactly like the one in your picture, Watson but you could cut the angles any way you like.

This has how to make the template for the blocks. It is a small template; perhaps your local hardware could cut you one from plexiglass.

http://www.craftbuds.com/whirligig-q...lock-tutorial/

Reminds me of a tumbler block (one up and one down) with the black sashing added and then squared it off at a certain size and then put all the blocks together. Maybe I need more coffee this morning??

It reminds me of the magic tile blocks. I still have the template pattern (brown paper) and directions (take the top piece from the first cut and place it at the bottom of the pile....) somewhere. I made one for someone and for the life of me, cannot remember who.

I think you can do it either way. I would probably do it your husband's way because I prefer to have straight (perpendicular) grain lines on the outside edges of blocks/units when possible.

If you plan to use the same color combinations more than once - or only once, as far as that goes - strip piecing could be done and cut at an angle like you mentioned.

I would also 'stack and whack' a bunch of squares, mix them up, then add the black sashing strip when joining them back together. Zero waste.

There is no need to have all the squares cut at the same angle. I would lay eight squares of fabric in a pile, cut through all of them at an angle and then sew them back together with the slim black sashing, using two different prints for re-creating each square. Then take another stack of eight squares and cut at a different angle and repeat. This would give more interest to the whole quilt.

here is a link to the pattern - it's on the top right http://www.kathleenbissett.com/PatternsMain.html

Similar, but not the same.

This one is a 9-P style, whereas the one Watson asked about is a 2-P joined as 4-Ps.
KrisB's link looks like the pattern, but without the black strips.

This is how I make templates.

https://www.quiltingboard.com/tutori...t-t289344.html

Thanks, Everyone...I bought a Mystery Box of Batik FQ's and I've been trying to figure out what to do with them. This might be just the thing.

Watson