Singer 6105
 

Recently serviced Singer 6105. Feed dogs froze. Can t afford another shop visit. Any suggestions

Sorry, I cannot help directly regarding your question, as I am not familiar with the specific machine.

However, if it has been recently serviced, perhaps you should be contacting the shop.
It may be covered with a warranty of sorts, with it being recently serviced.
Unless, of course, if your recent is longer than what they would cover it for?

Check the bobbin area. I had the top thread around the bobbin area twice and it froze. I took the bobbin apart, cleaned it out and then it went smoothly.

I once had a similar issue. I removed the needle plate and found a huge buildup of lint around the feed dogs. A rather simple fix.

When we service a machine and it doesn't work when the customer takes it home, we want to sit down with the customer and see if we missed something. Or, if it's user error. I'll bet your sewing machine tech would be glad to sit down with you and figure out what the problem is, without charging you anything.

When you say the "feed dogs froze," do you mean that they won't pull the fabric through? It could be that the presser foot tension dial got bumped? It's on the top, left side of your machine. Set it to the highest number and see if that helps. I can't tell from pictures online, but it probably has a feed dog drop switch on the back of the machine. Make sure that's in the correct position, so the feed dogs are up. Set the stitch length knob to its highest number, then turn it down to the length you want.

I hope you're able to get your machine sewing again.