Welcome to the Quilting Board!

Already a member? Login above
loginabove
OR
To post questions, help other quilters and reduce advertising (like the one on your left), join our quilting community. It's free!

Results 1 to 5 of 5

Thread: Singer 6105

  1. #1
    Member
    Join Date
    Jun 2012
    Posts
    6
    Blog Entries
    1

    Singer 6105

    Recently serviced Singer 6105. Feed dogs froze. Can t afford another shop visit. Any suggestions

  2. #2
    Power Poster QuiltE's Avatar
    Join Date
    Apr 2011
    Location
    Ontario, Canada
    Posts
    16,538
    Sorry, I cannot help directly regarding your question, as I am not familiar with the specific machine.

    However, if it has been recently serviced, perhaps you should be contacting the shop.
    It may be covered with a warranty of sorts, with it being recently serviced.
    Unless, of course, if your recent is longer than what they would cover it for?
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Sew many ideas ... just sew little time!!
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    https://www.flickr.com/photos/[email protected]/

  3. #3
    Senior Member
    Join Date
    Apr 2010
    Posts
    696
    Check the bobbin area. I had the top thread around the bobbin area twice and it froze. I took the bobbin apart, cleaned it out and then it went smoothly.

  4. #4
    Super Member Aurora's Avatar
    Join Date
    Dec 2009
    Location
    Somewhere in Time
    Posts
    2,660
    Blog Entries
    2
    I once had a similar issue. I removed the needle plate and found a huge buildup of lint around the feed dogs. A rather simple fix.
    Aurora

    "A dying culture invariably exhibits personal rudeness. Bad manners. Lack of consideration for others in minor matters. A loss of politeness, of gentle manners, is more significant than is a riot." -Robert A. Heinlein

  5. #5
    Super Member quiltedsunshine's Avatar
    Join Date
    Nov 2010
    Location
    Utah
    Posts
    1,329
    When we service a machine and it doesn't work when the customer takes it home, we want to sit down with the customer and see if we missed something. Or, if it's user error. I'll bet your sewing machine tech would be glad to sit down with you and figure out what the problem is, without charging you anything.

    When you say the "feed dogs froze," do you mean that they won't pull the fabric through? It could be that the presser foot tension dial got bumped? It's on the top, left side of your machine. Set it to the highest number and see if that helps. I can't tell from pictures online, but it probably has a feed dog drop switch on the back of the machine. Make sure that's in the correct position, so the feed dogs are up. Set the stitch length knob to its highest number, then turn it down to the length you want.

    I hope you're able to get your machine sewing again.
    Annette in Utah

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SEO by vBSEO ©2011, Crawlability, Inc.