I'm part of the police patrol for proper English. Congratulations! You used "affect" accurately.
|
Originally Posted by matraina
I'm part of the police patrol for proper English. Congratulations! You used "affect" accurately.
|
Originally Posted by PaperPrincess
I needed to make some sandwiches for a class. The instructor wanted us to spray baste. I usually do this outside, but it was 15 degrees. I covered my teak dining room table with newspaper, but I got some overspray on the table. I thought that spray basting was supposed to wash out with soap and water, but this didn't remove it from the table. I also tried the teak cleaner I had, and this just seemed to smear it. I think it will wear off eventually, but I'd like to clean it, or should i just add batting, backing and quilt it?
|
Affect is correct.
|
If soap and water wouldn't get it off your table, how does it wash out of the quilt?
|
how about some WD40, i use the WD40 that comes in a stick pen to take stickers off of things and it works
|
I use my non-oily marykay eye makeup remover, no streaks left behind
|
Lol haven't tried the spray baste thing don't mind basting.
|
Originally Posted by PaperPrincess
I needed to make some sandwiches for a class. The instructor wanted us to spray baste. I usually do this outside, but it was 15 degrees. I covered my teak dining room table with newspaper, but I got some overspray on the table. I thought that spray basting was supposed to wash out with soap and water, but this didn't remove it from the table. I also tried the teak cleaner I had, and this just seemed to smear it. I think it will wear off eventually, but I'd like to clean it, or should i just add batting, backing and quilt it?
|
Ti tree oil or eucalyptus oil gets it off, but you should check it on a small part of your table to make sure it doesn't affect whatever the finish is on your table.
|
Try rubbing alcohol. It won't hurt it at all, and will evaporate quickly
|
Just a few words about dust on your furniture. You should never remove dust because it is a protective layer for the wood.
FYI I use a king size old sheet when I use spray baste. Then I just wash it when I'm done. Much easier then newspaper. |
Maybe olive oil will work. I've removed a lot of sticky things from a lot of sticky surfaces with olive oil, and it is not harmful to anything, including hands and finger nails. I love your sense of humour too. Honestly, this group is just too much fun!!
|
All the suggested products probably work because of their oil based components and none should hurt the Teak. As for the Vintage Dust that could be a temporary problem but guaranteed to return with normal neglect...LOL Good Luck let us know what works.
|
Try an oil based cleaner like Murphys oil soap thats meant for cleaning wood.
|
What about Undu(sp)? It's the stuff that's used to remove labels from containers, old photographs from antique albums, etc. It doesn't hurt the photographs or labels so maybe it would be safe for your table, too? :? I sure hope you can remove it. If not, I kind of like your idea about adding some batting and quilting it! :thumbup: :lol: :lol:
|
Originally Posted by PaperPrincess
I needed to make some sandwiches for a class. The instructor wanted us to spray baste. I usually do this outside, but it was 15 degrees. I covered my teak dining room table with newspaper, but I got some overspray on the table. I thought that spray basting was supposed to wash out with soap and water, but this didn't remove it from the table. I also tried the teak cleaner I had, and this just seemed to smear it. I think it will wear off eventually, but I'd like to clean it, or should i just add batting, backing and quilt it?
|
You'll probably need a very sturdy needle when you quilt it! Perhaps a "log" cabin?
|
This and my lungs are just more reasons why I quit using the spray baste and only use safety pins and love them!
|
Rubbing alcohol will work but make sure before to do a test area, a hidden test area. It also removes tree sap from cars without hurting the paint.
Oh yea, try hair spray next time, I've heard it works as well as spray basting, never tried it myself though, actually, never tried spray basting either.... |
Originally Posted by mtnmama
I am really glad everybody found products to clean up overspray. I once had a really stupid idea to use a batting that you used steam to attach to the fabric. I was sandwiching a flannel quilt and thought it was thick enough and I would be fine on my dining room table. NOT! Every place where I hovered with my steam iron left a white spot on my dark pine table. I said a few really ugly works, shed a few tears and bought a table cloth. I screwed up, move on.
|
Originally Posted by PaperPrincess
I needed to make some sandwiches for a class. The instructor wanted us to spray baste. I usually do this outside, but it was 15 degrees. I covered my teak dining room table with newspaper, but I got some overspray on the table. I thought that spray basting was supposed to wash out with soap and water, but this didn't remove it from the table. I also tried the teak cleaner I had, and this just seemed to smear it. I think it will wear off eventually, but I'd like to clean it, or should i just add batting, backing and quilt it?
You might not have used enough teak cleaner. Try again. Put some on a cloth and rub it out...anything else might cause spots! Teak is tough but you never know what some chemicals might do to it. Next time, use a plastic tablecloth with the flannel on the back like some of us use for planning. (Plastic side up - Flannel side down) and....Well, I hate to tell you....but that is going to be reported to the quiltn police as being a mite too lumpy? |
Originally Posted by glenda5253
Originally Posted by mtnmama
I am really glad everybody found products to clean up overspray. I once had a really stupid idea to use a batting that you used steam to attach to the fabric. I was sandwiching a flannel quilt and thought it was thick enough and I would be fine on my dining room table. NOT! Every place where I hovered with my steam iron left a white spot on my dark pine table. I said a few really ugly works, shed a few tears and bought a table cloth. I screwed up, move on.
If you are down to wood, and it is lighter in color, use crayons carefully to match, and wax it. If it is varnished, try carefully the steel wool and mineral oil, wipe it off well then put on clear nailpolish on spots that are about dime sized... (it will come off with remover if you don't like it.) If you have very large areas, investigate using "French polish" on the internet or ask HOW TO ....? on google. |
you could always try Avon's Skin So Soft it removes all kinds of sticky stuff even pine pitch.
|
Is there no end to what Skin So Soft can do??
|
Hi everybody.
There is a product from J T trading company called "DK5" that removes spray bastings I have used it and it works. A little smelly so open a window. Here in the NE its -4 degrees. I still open a window for awhile. Lots of luck. Purchased this in a quilt shop in Mass. |
When I worked at the LQS, we had a product called DK5. Its pput out by the makers of 505 adhesive spray. Its for the removal of overspray. Its looks oily when it poes on but it dries and goes away. Just spray iton a soft cloth and then wipe the affected area. It does not harm furniture at all. It can be used on plastic, metal, glass, stone and ceramics surfaces. (I'm reading the label as I type.) Do not use it on fabric. I used it at the store and here at home with great success.
|
Originally Posted by donnalynett
This and my lungs are just more reasons why I quit using the spray baste and only use safety pins and love them!
|
Originally Posted by PaperPrincess
For future reference, I used goo gone. Put a tiny amount on a paper towel, then rubbed the area. Removed residual oil with another paper towel. Didn't seem to affect (effect? any grammar police out there?) the teak at all.
BTW... "affect" is the right word. (I am an English teacher.) |
Drat--I wanted to see the quilted DR table.
|
Originally Posted by thepolyparrot
Ouch - I hope it all comes off. I'd try the baby oil or a furniture polish oil - teak needs oiling every now and then anyway, doesn't it?
My dining room table is currently finished in vintage dust... I should get out the furniture oil, myself. :? |
Machine quilting on that baby will really be a challenge! :lol:
|
Originally Posted by Minnisewta
Just a few words about dust on your furniture. You should never remove dust because it is a protective layer for the wood.
|
Originally Posted by PaperPrincess
I needed to make some sandwiches for a class. The instructor wanted us to spray baste. I usually do this outside, but it was 15 degrees. I covered my teak dining room table with newspaper, but I got some overspray on the table. I thought that spray basting was supposed to wash out with soap and water, but this didn't remove it from the table. I also tried the teak cleaner I had, and this just seemed to smear it. I think it will wear off eventually, but I'd like to clean it, or should i just add batting, backing and quilt it?
|
Have to tried the Mr Clean Erasers - they work great on so many things
|
One time I helped my painter friend set up for a tour that was going through her gallery and she had some glass table tops that had tape on them. To get rid of the sticky residue she had me use mineral spirits. Haven't found anything that advises you not to use them on...say...a wooden dining table
|
I don't think it is funny! I got it on my hnair dryer and can't get it off. Hair dryer looks dirty. GRRRRRRRRR
|
These could damage the finish on the table and require a refinish job. Act kind of like sandpaper.
|
Originally Posted by PaperPrincess
For future reference, I used goo gone. Put a tiny amount on a paper towel, then rubbed the area. Removed residual oil with another paper towel. Didn't seem to affect (effect? any grammar police out there?) the teak at all.
|
Originally Posted by JUNEC
Originally Posted by PaperPrincess
For future reference, I used goo gone. Put a tiny amount on a paper towel, then rubbed the area. Removed residual oil with another paper towel. Didn't seem to affect (effect? any grammar police out there?) the teak at all.
|
All times are GMT -8. The time now is 12:30 AM. |