I needed to make some sandwiches for a class. The instructor wanted us to spray baste. I usually do this outside, but it was 15 degrees. I covered my teak dining room table with newspaper, but I got some overspray on the table. I thought that spray basting was supposed to wash out with soap and water, but this didn't remove it from the table. I also tried the teak cleaner I had, and this just seemed to smear it. I think it will wear off eventually, but I'd like to clean it, or should i just add batting, backing and quilt it?
|
Don't know how to advise you, but love your sense of humor!!
|
I think some of the Orange based cleaners might cut the adhesive from the spray. Also the citrus oil should be good for the table. OR - like you said you could just baste it and quilt it-LOL! Good luck with the clean-up!!
|
I use baby oil (prefer the gel) to remove sticky labels from bottles. I don't know if it would work on basting spray or if it would harm your table, but if all else fails, you could try just a small amount.
|
that is to funny
|
Ouch - I hope it all comes off. I'd try the baby oil or a furniture polish oil - teak needs oiling every now and then anyway, doesn't it?
My dining room table is currently finished in vintage dust... I should get out the furniture oil, myself. :? |
try Scotts Liquid Gold-liquid or spray can.
|
How about some goo gone? It works great on labels tape or any stick substance and isn't harmful
|
For future reference, I used goo gone. Put a tiny amount on a paper towel, then rubbed the area. Removed residual oil with another paper towel. Didn't seem to affect (effect? any grammar police out there?) the teak at all.
|
I'll have to keep this in mind....
|
I baste on my cutting table andd use goo gone to clean it.
|
I had overspray on my laminate floor. I guess I didn't use enough newspaper. Anyway, I really couldn't get it off - it eventually wore off. I know I tried several things, from what I usually use to other cleaners. Didn't try goo gone though.
|
peanut butter is supposed to remove stickiness from labels, etc.
|
Originally Posted by thepolyparrot
Ouch - I hope it all comes off. I'd try the baby oil or a furniture polish oil - teak needs oiling every now and then anyway, doesn't it?
My dining room table is currently finished in vintage dust... I should get out the furniture oil, myself. :? |
WD-40 works to remove the spray residue and sticky labels.
|
Originally Posted by Stitchnripper
I had overspray on my laminate floor. I guess I didn't use enough newspaper. Anyway, I really couldn't get it off - it eventually wore off. I know I tried several things, from what I usually use to other cleaners. Didn't try goo gone though.
|
Originally Posted by MommaDorian
Originally Posted by Stitchnripper
I had overspray on my laminate floor. I guess I didn't use enough newspaper. Anyway, I really couldn't get it off - it eventually wore off. I know I tried several things, from what I usually use to other cleaners. Didn't try goo gone though.
|
GooGone is a great product. It removes gunk or adshives(spelling?) from all types of surfaces without damaging it.
|
Have you tried lemon oil or a furniture polish?
|
WD-40 works great!!!! Don't ask how I know! After getting the adhesive off, I rinsed with Murphy's Oil Soap to get the lubricant off. That combo worked so very well for me.
|
I sometimes have to spray baste on my bed. I first lay down a large sheet of plastic over the whole area. Then spray baste small items, not a full size quilt. I spray baste larger things outdoors or in the garage when its really cold. or wait for warm weather. Have folding tables out there to set up for large quilts.
|
Originally Posted by thepolyparrot
My dining room table is currently finished in vintage dust... :? :thumbup: |
I also have used goo gone and it works.
|
Try Un-Du, you should be able to get it at Wal-Mart or a scrapbooking store. It's an adhesive remover that really works and won't damage. It removes adhesive from photos with no damage.
|
Your vintage dust would go well with my dog hair!! lol
|
I am so g;ad to see that I am not the only one that does things like this. As for the dust, well I have told my hubby many times that the dust and cobwebs help hold the home together,
|
I have used A Mr Clean Magic Eraser to remove spray from my cutting table.
|
Try Goo Gone, Skin So Soft oil or Baby oil. Any of these should do the trick. (Wonder if cooking oil would work?)
|
I would be careful with goo gone. It is great but might eat into some surfaces
|
Originally Posted by PaperPrincess
I needed to make some sandwiches for a class. The instructor wanted us to spray baste. I usually do this outside, but it was 15 degrees. I covered my teak dining room table with newspaper, but I got some overspray on the table. I thought that spray basting was supposed to wash out with soap and water, but this didn't remove it from the table. I also tried the teak cleaner I had, and this just seemed to smear it. I think it will wear off eventually, but I'd like to clean it, or should i just add batting, backing and quilt it?
|
Originally Posted by grann of 6
I have a product called DK5 for removal of Adhesive Residue from Spray & Fix, 202,404, & 505. I use it on my embroidery hoops when I have used adhesive stabilizer. I also used it to remove the residue from a label on a plastic table I bought. And I used it to clean up overspray on my laminate floor. I think I bought it in the adhesives aisle of either Joann's or AC Moore (a craft store). Try it on a small area to be sure it doesn't harm your teak finish.
|
I am really glad everybody found products to clean up overspray. I once had a really stupid idea to use a batting that you used steam to attach to the fabric. I was sandwiching a flannel quilt and thought it was thick enough and I would be fine on my dining room table. NOT! Every place where I hovered with my steam iron left a white spot on my dark pine table. I said a few really ugly works, shed a few tears and bought a table cloth. I screwed up, move on.
|
yeah, I was thinking WD40 as well.
|
Originally Posted by Rachel
peanut butter is supposed to remove stickiness from labels, etc.
|
Murphys oil soap fixed mine up nicely.
|
I have some scrubbys made from Aunt Lydias rug yarn and they work great from getting the sticky off my cutting mat.
|
vinegar works well too. Just be careful to wipe it off quickly dont leave it sit too long
|
There is a product called Goo Gone that I buy at a large hardware store (Menards) that works great on most hard t remove stuff and works well on wood.
|
In a small space, try mineral oil and 0000 steel wool This is used to put a 'hand rubbed' finish on furniture, I used it on a bench that someone with sweaty body sat on and left an imprint. A little patience and it is like new. Much easier than a refinish job.
|
Try WD-40. It removes sticky labels from bottles.
|
All times are GMT -8. The time now is 08:17 AM. |