|
Originally Posted by GailG
Originally Posted by Tallulah
Originally Posted by costumegirl
Tallulah - I LOL! at your comment about not to thread at night!!! That is sooooo true!!! It always takes longer at night - I will have a more difficult time figuring out/remembering the steps! :) but during the day it seems less painful (LOL, well at least sometimes!!) :)
I also considered the colors I was working with at the time. Sometimes I'd notice that most of my fabric was in the blue family, or perhaps in the browns. Then I'd use colors that worked with the particular groups of fabrics. Sounds OCD, huh. Honestly , I'm definitely NOT, but it worked for me. :lol: |
The general rule is to thread the loopers first (the needles are easy to thread.....) Most of the loopers are not to dificult to thread but you must go acording to the right order (each serger is diferent)...
I also belived that I made a mistake by buying me a serger when I first look at all this intimidating details.....But after dedicating it some time (I would recomend to learn one or two steps a day....) there was only one intimidating detail: threading the four's looper..... After this was mastered...... WE have been happily leaving together for almost three years now..... I own the Brother 1034 D and it states its easy to thread.... Its a great tool..... |
This is a great thread, haha, I have a Janome serger and I have never been able to thread it, but my hubby does a great job....
I do have a ??, what kind of thread is the best to use? My H thinks I should buy a better kind...... |
I have a bernina serger. I have never unthreaded it. When I change colors, I cut the threads from the spools, replace the spools and tie the different colors together. I then push the foot pedal and hold out the end threads until the knots come down to the needle then cut only the thread to go through the needle - works out perfectly everytime and my machine is many years old. My machine is also coded with colors for each spool of thread - would be easy to follow if I ever unthread. Good luck!
|
Schwanton is correct, never unthread the serger - always tie your new thread to the old thread.
Now, I have accidently unthreaded mine - Singer, it it took an hour to get it correctly threaded. Unfortunately if a thread breaks, my experience, you have to rethread in the correct order...so if thread 1 breaks - you must rethread all (trust me learned the hard way tryng to short cut) Once threaded correctly - I love my serger. It opens up new avenues for sewing and quilting too. Hang in there,and very carefully in order follow the color coded chart on the machine. Do not try to short cut, thread the machine in the order specified in the directions. It does make a difference(do not know why, but does). I can now thead my machine in about 10 minutes if needed, but I use schwanton's suggestion of kntting the new color to the old. |
It really shouldn't take 10 min lol..however if you would see how a serger works with the way the loopers connect with the needle or needles to form the stitch..then you can see why threading in correct order is important. Once you know how it works..you can also learn how to thread just one if necessary cause you can see how to by pass the "catch"
|
First, best advice. Never, never unthread a serger!
|
lol never unthread a serger? thats like saying never go on a trip when it "might" rain..best thing is to be prepared with knowledge. Then your serger will get the use it was purchased for
|
I'm looking into a brother 4 3 2 serger with built in threader and amp cd. Anyone know about this one ? I have a bernina 2500cde and I'm so frustrated trying to rethread. When I sit to sew I want to sew !! So.......hoping I can get this new one sooooooon.
|
I tie off when I want to changed thread rather than re-thread. I've had to re-thread from ground zero a couple of times, but my manual is pretty good. Once you get it threaded correctly, tie off next time. It makes life much easier.
|
| All times are GMT -8. The time now is 05:21 AM. |