|
Trouble with borders
This isn't my first rodeo, but it is the biggest quilt I've done. I do it the Bonnie Hunter way, that didn't work this time, too short. Tried measuring in 3 places and it's too long. If I hadn't spent so much money and time on this thing I'd have a bonfire with this quilt being the star attraction. Any advice would be appreciated.
|
I'm not familiar with the Bonnie Hunter way. I measure down the center of my quilt, cut the borders to that length, and ease the quilt to fit.
|
I cut enough to be longer than the quilt top, and slice it off AFTER sewing. It works for me.
|
Originally Posted by Boston1954
(Post 7291001)
I cut enough to be longer than the quilt top, and slice it off AFTER sewing. It works for me.
|
I make sure my quilt top is well pressed and sometimes starched before measuring. I measure the shortest sides first(usually top and bottom) if they are the same, I cut my 2 end borders but leave an extra inch. I mark where the end should be in the seam allowance (Frixion pen)I pin to the mark and place pins at intervals along the length easing in any extra fabric from the top where needed. If the top extends over the mark a tad after sewing, I don't worry about and then trim off the extra. I follow the same process for the long sides.
|
Originally Posted by Boston1954
(Post 7291001)
I cut enough to be longer than the quilt top, and slice it off AFTER sewing. It works for me.
|
Originally Posted by ManiacQuilter2
(Post 7291111)
An old carpenter say is Measure twice, Cut once.
|
Originally Posted by Boston1954
(Post 7291001)
I cut enough to be longer than the quilt top, and slice it off AFTER sewing. It works for me.
Tartan, I've printed off your instructions and will give that a go. It's just so frustrating! I told DH that once I got this one finished I'd probably give it away even though I'm making it for us, because every time I look at it, I get mad, lol. |
If the border piece is larger than the top, find the center and quarters of the quilt top and the border. Pin the centers and quarters together. Line up ends and pin. Then put a few pins between the ones already holding the pieces together. Now put the border against the feed dogs and sew. The feed dogs should ease as much as a half inch per half. If the quilt top is larger, put it against the feed dogs. Works everytime for me.
|
I have very good results with Bonnie Hunter's method and have not "measured" a border since. I fold my pressed quilt top in half the long way, smooth it out, lay the border pieces out on top, smooth those. I pin every so often so they don't shift. Then I cut either end even with the top. I fold the borders into quarters and either press or pin the edge. Do the same with the top. Match the quarter marks, I pin ALOT (every 6" or so) and ease the rest in as you sew. Press, repeat for the other edges.
Some fabrics have more "give" than others. Be careful you aren't stretching as you measure. |
After finding the center and quarters, as previously suggested, have you tried a thin line of glue along the edge to be sewn? It keeps things from stretching while you work.
You mentioned four borders, which is quite a bit of opportunity to stretch or wave. Just plain Elmer's white washable glue. I also use it to baste layers for quilting. Please post pictures once you are done (or before you light the match). : ) |
That is what I do and it always works..... Keep quilting
eunice |
Boston 1954:
Sorry I posted my reply to the wrong message .. I do the same as you do and I have never had any problems. Just keep quilting |
Originally Posted by Boston1954
(Post 7291001)
I cut enough to be longer than the quilt top, and slice it off AFTER sewing. It works for me.
|
Can you sew those 4 borders together, then sew onto top, mitering the corners?
|
Originally Posted by katier825
(Post 7291272)
I have very good results with Bonnie Hunter's method and have not "measured" a border since. I fold my pressed quilt top in half the long way, smooth it out, lay the border pieces out on top, smooth those. I pin every so often so they don't shift. Then I cut either end even with the top. I fold the borders into quarters and either press or pin the edge. Do the same with the top. Match the quarter marks, I pin ALOT (every 6" or so) and ease the rest in as you sew. Press, repeat for the other edges.
Some fabrics have more "give" than others. Be careful you aren't stretching as you measure. |
This is what I was going to suggest.
Originally Posted by Geri B
(Post 7292757)
Can you sew those 4 borders together, then sew onto top, mitering the corners?
|
Originally Posted by joe'smom
(Post 7290999)
I'm not familiar with the Bonnie Hunter way. I measure down the center of my quilt, cut the borders to that length, and ease the quilt to fit.
|
Originally Posted by Geri B
(Post 7292757)
Can you sew those 4 borders together, then sew onto top, mitering the corners?
|
I measure thru the center and cut borders... I've never had a wavy border. Good luck!!
|
I was having a problem with wavy borders on large quilts , after watching many YouTube videos I now measure three times. Example. If I am adding a border to the sides I measure each side and down the middle, add these numbers and divide by three. Then cut my border to that measurement. When I add it to the guilt I pin each end and the middle then ease the sides in. My quilts no longer have a wave to the border.
|
| All times are GMT -8. The time now is 06:58 AM. |